FSCUT2000S medium power laser cutting system is a full-solution open-loop control system specially designed for sheet metal fabricaton industry, with features of easy to install and adjust, excellent performance and fully integrated solutions, it is the upgrade version from FSCUT2000C.

Hardware

Technical Data

Model

FSCUT2000S

Control card

BMC2104

I/O terminal board

BCL3766

Motor control signal

X/Y1/Y2/W axes pulse output, maximum frequency 3MHz

X/Y1/Y2 axes port receive encoder feedback, highest sampling frequency 10MHz

W axis port can be assigned as rotary axis or autofocus unit

Dedicated inputs

8 limit inputs: +/-limit for X/Y1/Y2/W axes

4 origin inputs: X / Y1 / Y2 / W axes origin signal inputs:

Common inputs

15 inputs: low-level active by default option, supports NO and NC mode. IN3~IN15 can switch between active low and active high

Software

CypCut Laser Cutting Control Software

Interface type

PCIE bus, X16, 250MB/S

Power supply

24V DC/2A

Work environment

Temperature: 0-55℃

Humidity: 5%-95% (no condensation)

Dedicated outputs

2 DA outputs: 0~10V，50mA

1 PWM output: 5V/24V for option, precision of 50KHz (0.1%)

Common outputs

8 relay output, load capacity 250V AC/5A, 30V DC/5A

12 thyristor output, load capacity DC 24V/500mA

Benefits

Cutting technique

Support up to 5-stage piercing technique, segment and stepping piercing patterns.

Support the communication with mainstream laser brands on the market.

Support basic technique of Fly cut, frog-leap lifting, kerf width compensation, lead line, micro-joint, pre-piercing, film cutting etc.

Support advanced functions of find workpiece edge, auto focus control, dual shuttle, break point locate, QR code generation, remnant split, round tube cutting etc.

Provide fine cutting technique, smooth start and end in the toolpath cutting.

Support intelligent barrier avoidance, laser head frog-leap lifting in production.

Support scan QR import drawing, task scheduling, and multi-area production etc.

Control performance

Open-loop control system with Friendess 3rd generation motion control algorithms.

Trajectory accuracy 0.03mm, positioning accuracy 0.001 mm, repetitive positioning accuracy 0.003 mm.

Maximum cutting speed 80m/min, maximum position speed 150m/min.

Maximum acceleration 1.5G.

Provide dual-Y drive position error detect function.

Application

Applicable to 1500W ~ 6000W medium power fiber laser cutting machine, widely used in fabricating industries of metal workpiece, kitchen utensils, lamps, cabinets and more.