Hand-held laser welding process for stainless steel doors and windows

Now, the stainless steel doors and windows that can be seen everywhere provide a guarantee for our life and property safety. The popularity of stainless steel doors and windows has driven the development of the welding industry. In the traditional processing technology, the welding of stainless steel doors and windows uses an argon arc welding machine, but with the in-depth use of the argon arc welding machine, more and more shortcomings are exposed, and the appearance is not very satisfactory. In the past two years, with the rapid and high-speed development of the laser industry, laser welding has gradually been used in the welding of stainless steel doors and windows. The use of hand-held laser welding machines can avoid certain technical bottlenecks. The welding effect is also very beautiful, without the need for later polishing. The process will not be deformed. Therefore, the hand-held laser welding machine is selected for the welding of stainless steel doors and windows, which improves not only the beauty but also the efficiency.

The welding principle of the handheld welding laser machine is a laser welding machine equipment that couples a high-energy laser beam into an optical fiber, collimates it into parallel light through a collimator, and then focuses on the workpiece to perform welding. For parts that are difficult to access by conventional welding machines, the non-contact welding of hand-held laser welding machines has greater flexibility. Customers can flexibly adjust the position of multi-angle welding during operation, and can realize welding at any position such as spot welding, straight seam welding, overlap welding, and circumferential welding.

The use of hand-held laser welding equipment greatly reduces the technical requirements for operation, does not require a job certificate and rich experience, greatly reduces the labor cost of welding, and is simple and easy to use. We only need to adjust the welding parameters according to the thickness of the stainless steel doors and windows, and the welding process does not need to add welding wire and other auxiliary consumable gases. The handheld laser welding machine has strong penetrating ability, neat and beautiful welding, and good welding stability. It is widely used for welding stainless steel doors and windows, handrails and stainless steel craft products.

Advantages of handheld laser welding machine equipment:

1. The welding speed is 2-10 times faster than traditional welding, and it can save 2 welders a year.

2. The weld seam is beautiful, no later polishing process is required, and the cost is saved.

3. The handheld welding head is equipped with five meters of imported optical fiber, which is flexible and convenient, and can realize outdoor welding.

4. The operation mode of the hand-held welding gun can weld any part of the workpiece at any angle.

5. Intelligent switching of dual optical paths, even time-sharing light energy distribution.

6. Suitable for all kinds of complicated welding seams and spot welding of various devices.

7. It is easy to realize automation, can be organically combined with the manipulator, and the welding is more flexible and convenient.

The handheld laser welding machine equipment is mainly used in the stainless steel door and window industry, hardware industry, advertising industry, auto parts, craft gifts and other industries.