DPL-F3015D models are DAPENG medium-size machines available with 1000W, 1500W, 2000W and 3000W laser
power. It is available with
• Most proven for industrial fabrication
• More power for more speed for higher thickness of material.
• Option of Automatic Pallet changer system get maximum production to achieve targets
• Increased safety
Laser cutting is a technology that uses a laser to cut materials, and is typically used for sheet metal fabricators, but is also starting to be used by schools, small businesses, and hobbyists. Laser cutting works by directing the output of a high-power laser most commonly through optics. The laser optics and CNC (computer numerical control) are used to direct the material or the laser beam generated. A typical commercial laser for cutting materials would involve a motion control system to follow a CNC of the pattern to be cut onto the material. The focused laser beam is directed at the material, which then either melts, burns, vaporizes away, or is blown away by a jet of gas, leaving an edge with a high-quality surface finish. Industrial laser cutters are used to cut flat-sheet material as well as structural and piping materials.
1) Cost saving on power consumption/ only 20-30% of co2 laser cutting machine
2) Higher cutting speed 120m/min and Imported servo motor and gearing system ensure precision cutting
3) Easy of operation
4) Error detection, diagnosis & solution
5) Scan cutting: Short distance cutting without head lifting
6) Automatic search edge function: if work piece put slanting, machine can auto detect it and automatic adjust cutting, so less waste of material and no need to move the metal sheet
7) Memory cutting: Once power off suddenly, the software has memory of cut stop point, when power on, the machine will continue cutting from the break point.
8) Adopts Proportional Valve: Control the air pressure automatically replace of manually, save much time.
9) Safety Features : Pause / Emergency Stop (can we pause or stop machine during cutting )
10) Stable working table: DAPENG cutting bed around 6.5 tons in weight, Dual drive, aging treatment, stress relief test, make sure longe time lasting without changing shape.
11) Automatic pallet changer, saving loading and unloading time.
Stainless steel, Mild steel, alloy steel, silicon steel, spring steel, aluminum, aluminum alloy, galvanized sheet and other metal pipes and tubes.
High Power CNC Fiber Laser Cutting Machine with Automatic Pallet Changer
Max cutting speed(m/min)
Min line width
Max Cutting depth （MS)
Stainless Steel N2
Imported servo motor
Imported gear rack & pinion double driver
Work Piece Weight
DP 3015 FIBER LASER CUTTING MAIN COMPONENTS LIST:
Made of origin place and Manufacturer
Fiber Laser source
RAYCUS or IPG
Hiwin from Taiwan or RexRoth Guide rail
Rack & Pinion
YYC from Taiwan or Appex Race pinion gear.
Shimpo from Japan
Servo Motor & Driver
Schneider from France or yaskawa servo motors
Aventics from Germany
Airtac from Taiwan
Schneider from France
Omron from Janpan
Free Consumable with machine
Nozzles 20 sets, Protective windows 10 nos., Mounting plates , Rubber Gloves and cleaning Buds