Laser rust removal compared with other methods of rust removal

Laser rust removal compared with other methods of rust removal

1. What are the disadvantages of choosing manual rust removal compared to laser rust removal?

The common method of manual rust removal is generally to use a wire brush, sand disc, sackcloth, etc. to gently wipe or pull the steel bar back and forth on the sand pile to remove the rust. In this way, the effect after clearing is not bad for the time being, but it will take a long time. Passivation occurs. It will return to its original state. It doesn't meet everyone's needs at all. It's a simple thing to do over and over again. Real numbers are cumbersome and unnecessary.

2. What's wrong with chemical rust removal?

Steel rust remover is a kind of steel rust removal material mixed with a and b components. It is made up of various components. It is not too safe to use than other steel rust removers. It can be used in a short time. Remove severe rust. It can temporarily restore the original color of the metal, without short-term damage to the base metal, and can clean the rust material on the surface of the steel bar, and it can also work in small gaps. Effective at room temperature. However, the treated metal surface will have an impact on electroplating and painting, and also affect the grip of the steel bar. The scope of application is: rust, iron filings and rust slag of equipment made of cast iron, carbon steel, alloy and other materials. Dissolves metal oxides. Method of use: A reasonable concentration and cleaning time should be selected according to factors such as the degree of rust and thickness, and the a component can be diluted 2-6 times for use. Component a is a concentrated formula. For rust, it will have a good effect if it is diluted more than 20 times. Soaking, dipping, brushing, spraying, forced circulation and ultrasonic cleaning can be used. This product can effectively penetrate into the rust layer and dissolve stubborn oxides, deposits, slag, etc. Apply to rusted metal surfaces for a few minutes to temporarily reveal the true color of the metal. Then rinse the rust-removed steel bars with clean water, and then brush (or soak, dip, spray) the liquid of component B on the metal surface.

3. Laser rust removal will definitely surprise you and surprise your eyeballs

The so-called laser rust removal is to automatically remove the rust of the wire rod and steel bar with a smaller diameter through the process of cold drawing and straightening; the thick steel bar is removed by a disc wire brush rust remover. There are two types of laser rust removal: fixed type and mobile type. Generally, it is self-made by the steel bar processing unit. The power drives the disc wire brush to rotate at a high speed to remove the rust, so as to remove the rust on the steel bar. Fixed laser rust removal generally installs a disc wire brush, in order to improve efficiency, the two methods can also be used together.