 |
| Quantity: | |
|---|---|
RFL-C1000X
DAPENG
RFL-C1000X
3000W Raycus Fiber Laser Power Source For Laser Cutting Machine
| Model | RFL-C3000 |
| Central wavelength(nm) | 1080±5 |
| Average output power: (W) | 3000 |
| Output power stability | ±1.5% |
| Maximum modulation frequency:(kHz) | 5 |
| Red laser | Yes |
| Output connector | QBH(customizable) |
| Output fiber core diameter(μm) | 50(customizable) |
| Polarization state | Random |
| Output fiber length(m) | 20(customizable) |
| Beam quality | 5-7 |
| Iutput power(V AC) | 380±10%,Three Phase-four Wire Connect |
| Control mode | RS232,AD |
| Power adjustment range(%) | 10-100 |
| Polarization state | Random |
| Dimensions (mm ) | 900*447*521(handle included) |
| Weight (kg ) | <80 |
| Working temperature(ºC ) | 10-40 |
| Cooling method | Water cooling |
It has the advantages of high electro-optical conversion efficiency, good beam quality, high energy density, wide modulation frequency, strong reliability, long life, and maintenance-free operation. It can be widely used in welding, precision cutting, cladding, surface treatment, 3D printing and other fields. Its optical fiber output characteristics make it easier to integrate with robots into flexible manufacturing equipment to meet the needs of three-dimensional processing.
3000W Raycus Fiber Laser Power Source For Laser Cutting Machine
| Model | RFL-C3000 |
| Central wavelength(nm) | 1080±5 |
| Average output power: (W) | 3000 |
| Output power stability | ±1.5% |
| Maximum modulation frequency:(kHz) | 5 |
| Red laser | Yes |
| Output connector | QBH(customizable) |
| Output fiber core diameter(μm) | 50(customizable) |
| Polarization state | Random |
| Output fiber length(m) | 20(customizable) |
| Beam quality | 5-7 |
| Iutput power(V AC) | 380±10%,Three Phase-four Wire Connect |
| Control mode | RS232,AD |
| Power adjustment range(%) | 10-100 |
| Polarization state | Random |
| Dimensions (mm ) | 900*447*521(handle included) |
| Weight (kg ) | <80 |
| Working temperature(ºC ) | 10-40 |
| Cooling method | Water cooling |
It has the advantages of high electro-optical conversion efficiency, good beam quality, high energy density, wide modulation frequency, strong reliability, long life, and maintenance-free operation. It can be widely used in welding, precision cutting, cladding, surface treatment, 3D printing and other fields. Its optical fiber output characteristics make it easier to integrate with robots into flexible manufacturing equipment to meet the needs of three-dimensional processing.
