 |
| Quantity: | |
|---|---|
MSP-DL1350
— Dry Type | Steel Hammer Disc + Sanding Belt + Flap Wheel Brushes | One-Pass Processing
This 1350mm heavy-duty deburring and finishing machine is specially designed for laser-cut sheet metal parts that contain heavy slag, burrs, and sharp edges. It combines three powerful working units:
Steel Hammer Disc Unit for heavy slag removal
Sanding Belt Station for burr grinding and surface brushing
Rotary Flap Wheel Brushes for edge rounding and oxide film removal
With dry processing, high feed rate, and vacuum bed holding, this machine delivers high throughput, safe edge rounding (R chamfering), and high surface consistency for stainless steel, carbon steel, aluminum, and non-ferrous materials.
Steel Hammer Disc Unit:
Mounted with hardened steel blocks that oscillate horizontally, hammering and dislodging heavy slag and large burrs typically found after plasma cutting or flame cutting.
Removes thick oxide layers and dross efficiently.
Sanding Belt Station:
High-speed abrasive belt for burr grinding, surface preparation, and smoothing.
Ideal for removing secondary burrs after hammering and preparing the surface for brushing.
Rotary Flap Wheel Brush Station:
8 disc brushes on a planetary head.
Each flap wheel brush counter-rotates and revolves simultaneously to provide 360° edge rounding, hole deburring, and oxide layer removal without damaging film-coated sheets.
Rounding effect is adjustable (up to R2.0) based on brush media and process parameters.
| Specification | Value |
|---|---|
| Max Processing Width | ≤1320mm |
| Material Thickness Range | 0.5–80mm |
| Minimum Workpiece Size | 50mm × 50mm (solid sheets) |
| Slag Hammer Disc Size | Φ162mm |
| Sanding Belt Size | Φ1910mm × 1350mm |
| Flap Wheel Brush Size | Φ300mm × 400mm |
| Feed Speed | 0.5–6 m/min, frequency adjustable |
| Sanding Belt Speed | ~18 m/s |
| Brush Rotation Speed | 8–26 m/s, adjustable |
| Brush Revolution Speed | 1–15 rpm, adjustable |
| Total Power | ~50–55KW (excluding dust collector) |
| Vacuum Suction | Included (for ≥50×50mm solid parts) |
| Dust Extraction Volume | ~5000 m³/h |
| Dimensions (L×W×H) | Approx. 3800mm × 2300mm × 2400mm |
| Machine Weight | ~5.5T |
Heavy slag removal + fine burr grinding + edge rounding in one pass
Supports laser, plasma, flame-cut, and stamped parts
Planetary brush system ensures full 360° deburring, including inner holes
Does not damage protective films or coatings
Dry processing system with optional wet dust collection
Suitable for mass production with consistent results
Laser cutting slag & burr removal
Plasma and oxy-fuel cutting dross removal
Edge rounding before welding or coating
Post-punching burr cleanup
Uniform finish for sharp-edged sheet metal
The MSP-DL1350 is a high-performance deburring, slag removal, and edge rounding machine specifically engineered for processing carbon steel sheet metal parts after laser cutting, plasma cutting, flame cutting, punching, or shearing. It integrates a dry steel hammer station, a sanding belt head, and eight multi-directional abrasive disc brush heads, delivering 360° processing for superior surface quality and consistent R-edge rounding.
This machine is a complete dry-processing system that removes heavy slag, laser oxide layers, burrs, and sharp edges in a single pass. It is ideal for applications in heavy fabrication, construction steel processing, machinery manufacturing, and similar industries demanding high throughput and flawless finishing.
✅ Heavy Slag Removal — Steel hammer disc brush station removes thick slag after thermal cutting
✅ Laser Oxide Film Removal — Sanding belt station cleans oxidation and residual burrs
✅ Edge Rounding & Deburring — Eight-disc planetary rotary brushes generate uniform R-radius on edges and holes
✅ Independent Stations — Each processing unit can be operated independently for specific needs
✅ Magnetic Conveyor Table — Strong permanent magnetic adsorption ensures part stability without fixtures
✅ Wet Dust Collection System — Efficient water-based dust removal with environmental filtration and safe air exhaust
Laser oxide removal
Heavy slag removal (plasma/flame cut parts)
Deburring inner and outer edges
Edge rounding up to R2mm
Surface brushing and polishing
Pre-treatment before painting or welding
Steel Hammer Station: Oscillating steel hammer discs strike and remove heavy slag and thick burrs.
Sanding Belt Station: Smooths surfaces, removes oxide films, and pre-polishes the material.
Planetary Brush Station: Eight abrasive disc brushes rotate and revolve in opposing directions to deburr and round all edges and inner holes, generating centrifugal action for a uniform R-radius.
All stations are modular and can function independently depending on the processing task.
| Parameter | Specification |
|---|---|
| Max Processing Width | ≤1330 mm |
| Processing Thickness | 0.5 – 80 mm |
| Min Workpiece Size | 50 × 50 mm (solid parts) |
| Total Power | 45.5 kW |
| Abrasive Belt Size | Φ1910 × 1350 mm |
| Brush Disc Size | Φ300 × 400 mm |
| Feed Speed | 0.5 – 6 m/min (VFD adjustable) |
| Sanding Belt Speed | 18 m/s |
| Brush Rotation Speed | 8 – 26 m/s (VFD adjustable) |
| Brush Revolution Speed | 1 – 15 rpm (VFD adjustable) |
| Planetary Brush Heads | 1 planetary set, 8 rotating heads |
| Servo Precision – Thickness | 0.01 mm |
| Servo Precision – Compensation | 0.01 mm |
| Grinding Media | Steel hammer + Sand belt + Brushes |
| Dust Collection Volume | 5000 m³/h |
| Machine Dimensions | L4500 × W2300 × H2500 mm |
| Machine Weight | Approx. 6 Tons |
Hammerhead Disc Unit: 9 pcs Φ162mm discs, 11kW motor
Abrasive Belt Grinding Unit: 1pc Φ185mm×1350mm, 15kW motor
Rotary Brush System: 8 rotating heads, 4 × 11kW motors
Servo Motors: For thickness adjustment and brush compensation (VEICHI)
Conveyor System: Magnetic rubber belt, 4kW motor with BKA87 reducer
Control System: VEICHI PLC + 7” Touchscreen HMI
Inverters: VEICHI brand for all motor speed controls
Dust Collection: Water-based wet filtration with high-pressure fan
Electrical Components: CHNT / NSK bearings
High Efficiency – Continuous through-feed design supports mass production
Precision Processing – Consistent R-edge rounding and no film damage on coated parts
Cost Reduction – Greatly reduces manual grinding labor and per-unit processing costs
️ Safe & Eco-Friendly – Closed-loop wet dust removal system ensures safe operation and green manufacturing
Flexible Functionality – Each unit operates independently for targeted tasks
— Dry Type | Steel Hammer Disc + Sanding Belt + Flap Wheel Brushes | One-Pass Processing
This 1350mm heavy-duty deburring and finishing machine is specially designed for laser-cut sheet metal parts that contain heavy slag, burrs, and sharp edges. It combines three powerful working units:
Steel Hammer Disc Unit for heavy slag removal
Sanding Belt Station for burr grinding and surface brushing
Rotary Flap Wheel Brushes for edge rounding and oxide film removal
With dry processing, high feed rate, and vacuum bed holding, this machine delivers high throughput, safe edge rounding (R chamfering), and high surface consistency for stainless steel, carbon steel, aluminum, and non-ferrous materials.
Steel Hammer Disc Unit:
Mounted with hardened steel blocks that oscillate horizontally, hammering and dislodging heavy slag and large burrs typically found after plasma cutting or flame cutting.
Removes thick oxide layers and dross efficiently.
Sanding Belt Station:
High-speed abrasive belt for burr grinding, surface preparation, and smoothing.
Ideal for removing secondary burrs after hammering and preparing the surface for brushing.
Rotary Flap Wheel Brush Station:
8 disc brushes on a planetary head.
Each flap wheel brush counter-rotates and revolves simultaneously to provide 360° edge rounding, hole deburring, and oxide layer removal without damaging film-coated sheets.
Rounding effect is adjustable (up to R2.0) based on brush media and process parameters.
| Specification | Value |
|---|---|
| Max Processing Width | ≤1320mm |
| Material Thickness Range | 0.5–80mm |
| Minimum Workpiece Size | 50mm × 50mm (solid sheets) |
| Slag Hammer Disc Size | Φ162mm |
| Sanding Belt Size | Φ1910mm × 1350mm |
| Flap Wheel Brush Size | Φ300mm × 400mm |
| Feed Speed | 0.5–6 m/min, frequency adjustable |
| Sanding Belt Speed | ~18 m/s |
| Brush Rotation Speed | 8–26 m/s, adjustable |
| Brush Revolution Speed | 1–15 rpm, adjustable |
| Total Power | ~50–55KW (excluding dust collector) |
| Vacuum Suction | Included (for ≥50×50mm solid parts) |
| Dust Extraction Volume | ~5000 m³/h |
| Dimensions (L×W×H) | Approx. 3800mm × 2300mm × 2400mm |
| Machine Weight | ~5.5T |
Heavy slag removal + fine burr grinding + edge rounding in one pass
Supports laser, plasma, flame-cut, and stamped parts
Planetary brush system ensures full 360° deburring, including inner holes
Does not damage protective films or coatings
Dry processing system with optional wet dust collection
Suitable for mass production with consistent results
Laser cutting slag & burr removal
Plasma and oxy-fuel cutting dross removal
Edge rounding before welding or coating
Post-punching burr cleanup
Uniform finish for sharp-edged sheet metal
The MSP-DL1350 is a high-performance deburring, slag removal, and edge rounding machine specifically engineered for processing carbon steel sheet metal parts after laser cutting, plasma cutting, flame cutting, punching, or shearing. It integrates a dry steel hammer station, a sanding belt head, and eight multi-directional abrasive disc brush heads, delivering 360° processing for superior surface quality and consistent R-edge rounding.
This machine is a complete dry-processing system that removes heavy slag, laser oxide layers, burrs, and sharp edges in a single pass. It is ideal for applications in heavy fabrication, construction steel processing, machinery manufacturing, and similar industries demanding high throughput and flawless finishing.
✅ Heavy Slag Removal — Steel hammer disc brush station removes thick slag after thermal cutting
✅ Laser Oxide Film Removal — Sanding belt station cleans oxidation and residual burrs
✅ Edge Rounding & Deburring — Eight-disc planetary rotary brushes generate uniform R-radius on edges and holes
✅ Independent Stations — Each processing unit can be operated independently for specific needs
✅ Magnetic Conveyor Table — Strong permanent magnetic adsorption ensures part stability without fixtures
✅ Wet Dust Collection System — Efficient water-based dust removal with environmental filtration and safe air exhaust
Laser oxide removal
Heavy slag removal (plasma/flame cut parts)
Deburring inner and outer edges
Edge rounding up to R2mm
Surface brushing and polishing
Pre-treatment before painting or welding
Steel Hammer Station: Oscillating steel hammer discs strike and remove heavy slag and thick burrs.
Sanding Belt Station: Smooths surfaces, removes oxide films, and pre-polishes the material.
Planetary Brush Station: Eight abrasive disc brushes rotate and revolve in opposing directions to deburr and round all edges and inner holes, generating centrifugal action for a uniform R-radius.
All stations are modular and can function independently depending on the processing task.
| Parameter | Specification |
|---|---|
| Max Processing Width | ≤1330 mm |
| Processing Thickness | 0.5 – 80 mm |
| Min Workpiece Size | 50 × 50 mm (solid parts) |
| Total Power | 45.5 kW |
| Abrasive Belt Size | Φ1910 × 1350 mm |
| Brush Disc Size | Φ300 × 400 mm |
| Feed Speed | 0.5 – 6 m/min (VFD adjustable) |
| Sanding Belt Speed | 18 m/s |
| Brush Rotation Speed | 8 – 26 m/s (VFD adjustable) |
| Brush Revolution Speed | 1 – 15 rpm (VFD adjustable) |
| Planetary Brush Heads | 1 planetary set, 8 rotating heads |
| Servo Precision – Thickness | 0.01 mm |
| Servo Precision – Compensation | 0.01 mm |
| Grinding Media | Steel hammer + Sand belt + Brushes |
| Dust Collection Volume | 5000 m³/h |
| Machine Dimensions | L4500 × W2300 × H2500 mm |
| Machine Weight | Approx. 6 Tons |
Hammerhead Disc Unit: 9 pcs Φ162mm discs, 11kW motor
Abrasive Belt Grinding Unit: 1pc Φ185mm×1350mm, 15kW motor
Rotary Brush System: 8 rotating heads, 4 × 11kW motors
Servo Motors: For thickness adjustment and brush compensation (VEICHI)
Conveyor System: Magnetic rubber belt, 4kW motor with BKA87 reducer
Control System: VEICHI PLC + 7” Touchscreen HMI
Inverters: VEICHI brand for all motor speed controls
Dust Collection: Water-based wet filtration with high-pressure fan
Electrical Components: CHNT / NSK bearings
High Efficiency – Continuous through-feed design supports mass production
Precision Processing – Consistent R-edge rounding and no film damage on coated parts
Cost Reduction – Greatly reduces manual grinding labor and per-unit processing costs
️ Safe & Eco-Friendly – Closed-loop wet dust removal system ensures safe operation and green manufacturing
Flexible Functionality – Each unit operates independently for targeted tasks
