 |
| Quantity: | |
|---|---|
1000
1000mm Automatic Double-Sided Sanding Machine:
Grinding and deburring machines are designed for the efficient deburring and edge rounding of plate materials on both sides, particularly focusing on parts processed through plasma and flame cutting after oxy-fuel or plasma cutting. These machines effectively remove burrs and sharp edges, enhancing the quality of steel and stainless steel parts.
The two-sided processing of these machines ensures that both the upper and lower edges of the material are rounded and deburred in one pass, leading to significant time savings and increased production efficiency. They are essential for achieving smooth and clean edges, critical in applications requiring safety, precision, and quality finishes.
These machines are especially beneficial in industries that deal with plasma-cut or flame-cut parts, providing a reliable solution for post-processing with minimal manual intervention.
| No. | Item | Parameters |
|---|---|---|
| 1 | Maximum Processing Width | 1000mm |
| 2 | Processing Thickness | 1-100mm |
| 3 | Sand Belt Size | Inner circumference 6710mm × Width 80mm |
| 4 | Hammer Baseband Size | BJ Quinary type, outer circumference 6377mm |
| 5 | Total Power of the Equipment | 160KW (main engine) |
| 6 | Hammer Main Motor | 15KW-6P (frequency adjustable speed) |
| 7 | Belt Main Motor | 15KW-4P (frequency adjustable speed) |
| 8 | Total Weight of the Equipment | Approximately 17.9T |
| No. | Item | Parameters |
|---|---|---|
| 1 | First Grinding Head | |
| 1.1 | Hammer Head Size | φ25mm × 50mm |
| 1.2 | Hammer Line Speed | 3-8m/s (frequency control) |
| 1.3 | Hammer Belt Size | BJ Quinary type, outer circumference 6377mm |
| 1.4 | Hammer Belt Drive Main Motor | 15KW-6 poles |
| 1.5 | Hammer Lifting Motor | 750W servo motor |
| 2 | Second and Third Grinding Heads | |
| 2.1 | Grinding Rubber Drive Wheel Diameter | Φ280mm, rubber hardness 70° |
| 2.2 | Belt Line Speed | 10-25m/s (frequency control) |
| 2.3 | Sand Belt Size | Inner circumference 6710mm × Width 80mm |
| 2.4 | Sand Belt Deviation Detection | Limit switch |
| 2.5 | Sand Belt Correction | Automatic correction |
| 2.6 | Belt Tension | Pneumatic automatic tension |
| 2.7 | Abrasive Belt Main Motor Power | 15KW-4 poles |
| 3 | Transport System | |
| 3.1 | Roller Diameter | Φ142mm, rubber hardness 80° |
| 3.2 | Drive Mechanism | Worm gear drive (stable and reliable) |
| 3.3 | Transmission Speed | 0.5-6m/min (frequency control) |
| 3.4 | Transport Main Motor | 5.5KW-4 poles × 2 |
| 4 | Dust Collection System | 7.5KW wet dust collector |
The two-sided sheet metal processing and edge rounding machine is designed for efficient, simultaneous treatment of both sides of sheet metal. It offers a maximum working width of 1000mm, 1600mm, or 2500mm, depending on the model, and can handle material thicknesses ranging from 0.5mm to 80mm.
This machine is highly suitable for applications requiring precision deburring and edge rounding, providing a smooth finish on both sides of the workpiece in a single pass. It is ideal for processing a variety of materials, such as stainless steel, aluminum, and other non-ferrous metals, across a wide range of thicknesses.
two-sided sheet metal processing and edge rounding machines:
The machine is suitable for processing stainless steel, aluminum, steel, and non-ferrous metals. It is designed to handle a wide range of materials for deburring, edge rounding, and finishing.
The machine comes with three available working widths: 1000mm, 1600mm, and 2500mm, providing flexibility for various sheet sizes.
The machine can process materials with thicknesses ranging from 0.5mm to 80mm, making it versatile for both thin and thick sheets.
Yes, the machine is capable of simultaneous two-sided processing, which significantly reduces the time needed for deburring and edge rounding.
The machine can handle both small parts and large sheets, making it versatile for a variety of applications.
Yes, the machine is designed for deburring laser-cut parts, stamped parts, and sheet metal components. It efficiently removes burrs and rounds the edges in a single operation.
The machine uses flexible grinding flap rollers that rotate and round the edges of the workpiece, ensuring consistent quality on both the inside and outside contours.
No, the machine is designed to protect coated or galvanized surfaces, ensuring that no damage occurs to the protective layers during processing.
Many models come equipped with a dust collection system (wet or dry) to keep the workspace clean and safe, efficiently handling the dust generated during grinding and deburring.
These machines are commonly used in industries such as automotive, aerospace, metal fabrication, machinery, and construction, where high precision and finishing quality are essential.
1000mm Automatic Double-Sided Sanding Machine:
Grinding and deburring machines are designed for the efficient deburring and edge rounding of plate materials on both sides, particularly focusing on parts processed through plasma and flame cutting after oxy-fuel or plasma cutting. These machines effectively remove burrs and sharp edges, enhancing the quality of steel and stainless steel parts.
The two-sided processing of these machines ensures that both the upper and lower edges of the material are rounded and deburred in one pass, leading to significant time savings and increased production efficiency. They are essential for achieving smooth and clean edges, critical in applications requiring safety, precision, and quality finishes.
These machines are especially beneficial in industries that deal with plasma-cut or flame-cut parts, providing a reliable solution for post-processing with minimal manual intervention.
| No. | Item | Parameters |
|---|---|---|
| 1 | Maximum Processing Width | 1000mm |
| 2 | Processing Thickness | 1-100mm |
| 3 | Sand Belt Size | Inner circumference 6710mm × Width 80mm |
| 4 | Hammer Baseband Size | BJ Quinary type, outer circumference 6377mm |
| 5 | Total Power of the Equipment | 160KW (main engine) |
| 6 | Hammer Main Motor | 15KW-6P (frequency adjustable speed) |
| 7 | Belt Main Motor | 15KW-4P (frequency adjustable speed) |
| 8 | Total Weight of the Equipment | Approximately 17.9T |
| No. | Item | Parameters |
|---|---|---|
| 1 | First Grinding Head | |
| 1.1 | Hammer Head Size | φ25mm × 50mm |
| 1.2 | Hammer Line Speed | 3-8m/s (frequency control) |
| 1.3 | Hammer Belt Size | BJ Quinary type, outer circumference 6377mm |
| 1.4 | Hammer Belt Drive Main Motor | 15KW-6 poles |
| 1.5 | Hammer Lifting Motor | 750W servo motor |
| 2 | Second and Third Grinding Heads | |
| 2.1 | Grinding Rubber Drive Wheel Diameter | Φ280mm, rubber hardness 70° |
| 2.2 | Belt Line Speed | 10-25m/s (frequency control) |
| 2.3 | Sand Belt Size | Inner circumference 6710mm × Width 80mm |
| 2.4 | Sand Belt Deviation Detection | Limit switch |
| 2.5 | Sand Belt Correction | Automatic correction |
| 2.6 | Belt Tension | Pneumatic automatic tension |
| 2.7 | Abrasive Belt Main Motor Power | 15KW-4 poles |
| 3 | Transport System | |
| 3.1 | Roller Diameter | Φ142mm, rubber hardness 80° |
| 3.2 | Drive Mechanism | Worm gear drive (stable and reliable) |
| 3.3 | Transmission Speed | 0.5-6m/min (frequency control) |
| 3.4 | Transport Main Motor | 5.5KW-4 poles × 2 |
| 4 | Dust Collection System | 7.5KW wet dust collector |
The two-sided sheet metal processing and edge rounding machine is designed for efficient, simultaneous treatment of both sides of sheet metal. It offers a maximum working width of 1000mm, 1600mm, or 2500mm, depending on the model, and can handle material thicknesses ranging from 0.5mm to 80mm.
This machine is highly suitable for applications requiring precision deburring and edge rounding, providing a smooth finish on both sides of the workpiece in a single pass. It is ideal for processing a variety of materials, such as stainless steel, aluminum, and other non-ferrous metals, across a wide range of thicknesses.
two-sided sheet metal processing and edge rounding machines:
The machine is suitable for processing stainless steel, aluminum, steel, and non-ferrous metals. It is designed to handle a wide range of materials for deburring, edge rounding, and finishing.
The machine comes with three available working widths: 1000mm, 1600mm, and 2500mm, providing flexibility for various sheet sizes.
The machine can process materials with thicknesses ranging from 0.5mm to 80mm, making it versatile for both thin and thick sheets.
Yes, the machine is capable of simultaneous two-sided processing, which significantly reduces the time needed for deburring and edge rounding.
The machine can handle both small parts and large sheets, making it versatile for a variety of applications.
Yes, the machine is designed for deburring laser-cut parts, stamped parts, and sheet metal components. It efficiently removes burrs and rounds the edges in a single operation.
The machine uses flexible grinding flap rollers that rotate and round the edges of the workpiece, ensuring consistent quality on both the inside and outside contours.
No, the machine is designed to protect coated or galvanized surfaces, ensuring that no damage occurs to the protective layers during processing.
Many models come equipped with a dust collection system (wet or dry) to keep the workspace clean and safe, efficiently handling the dust generated during grinding and deburring.
These machines are commonly used in industries such as automotive, aerospace, metal fabrication, machinery, and construction, where high precision and finishing quality are essential.
