 |
| Quantity: | |
|---|---|
300
The 300 is equipped with one deburring disc and one edge rounding disc, both of which oscillate continuously over the workpiece during the throughfeed process. The interaction between rotation and a large oscillation stroke results in excellent deburring and edge rounding. The wide variety of disc tools available makes this machine very versatile.
Key Features:
One large disc on the infeed side and one on the outfeed side.
Large oscillation stroke covers the entire width of the feed belt.
All internal and external edges are processed from all angles and directions.
Even wear of abrasive tools regardless of the workpiece size or its placement on the conveyor belt.
Quick tool change between different materials as only two discs need to be swapped.
Wide variety of disc tools available for versatility.
Capabilities:
Deburring and edge rounding of laser cut, plasma cut, and water cut parts.
Deburring and edge rounding of 3D punched parts.
Edge rounding and orbital finishing in a single pass.
Processing of smaller parts as small as 20mm x 20mm.
Handling foil-covered or zinc-plated parts.
Suitable for processing steel, stainless steel, and aluminum.
Technical Data:
Working width: 300 mm.
Smallest workpiece size: 20mm x 20mm.
Material thickness range: 0.3mm – 80mm.
Additional Features:
Rotating Cleaning Brush: Cleans the conveyor belt from below at the outfeed side.
Infinitely Variable Disc RPM: Allows adjustment of disc RPM for different applications.
Quick-Fix Tool Connector: Enables fast changing of discs, e.g., when switching between steel and stainless steel.
Lighting: LED lights inside the machine.
Magnetic Track: Permanent magnetic track below the feed belt for holding down smaller steel parts.
Dust Extraction Unit: Options available for wet or dry processing to remove harmful abrasive dust.
Aluminum Extraction Kit: Extraction hoods around the discs enhance the dust extraction process for aluminum.
TouchPanel Control: Colored touch panel for setting and displaying machine parameters and storing settings.
Conveyor Tables: Available for processing longer workpieces, with optional linkage of feed speed to that of the machine.
Table Extension: Available for the infeed and/or outfeed side.
Disc Tools:
SoftDisc: Soft pad for deburring mild steel or aluminum.
CompactDisc: Legally-protected disc for removing higher burrs and spatter on stainless steel.
MediumDisc: For edge rounding, available in various grit sizes and hardnesses.
OrbitalDisc: For creating a non-directional finish with the Löwer Orbital device (patent pending).
SmartFlexDisc: Flexible disc for edge rounding foil-coated, zinc-coated, or slightly deformed sheet metal parts.
OxideDisc: For removing the oxide layer on side edges.
The 300 is equipped with one deburring disc and one edge rounding disc, both of which oscillate continuously over the workpiece during the throughfeed process. The interaction between rotation and a large oscillation stroke results in excellent deburring and edge rounding. The wide variety of disc tools available makes this machine very versatile.
Key Features:
One large disc on the infeed side and one on the outfeed side.
Large oscillation stroke covers the entire width of the feed belt.
All internal and external edges are processed from all angles and directions.
Even wear of abrasive tools regardless of the workpiece size or its placement on the conveyor belt.
Quick tool change between different materials as only two discs need to be swapped.
Wide variety of disc tools available for versatility.
Capabilities:
Deburring and edge rounding of laser cut, plasma cut, and water cut parts.
Deburring and edge rounding of 3D punched parts.
Edge rounding and orbital finishing in a single pass.
Processing of smaller parts as small as 20mm x 20mm.
Handling foil-covered or zinc-plated parts.
Suitable for processing steel, stainless steel, and aluminum.
Technical Data:
Working width: 300 mm.
Smallest workpiece size: 20mm x 20mm.
Material thickness range: 0.3mm – 80mm.
Additional Features:
Rotating Cleaning Brush: Cleans the conveyor belt from below at the outfeed side.
Infinitely Variable Disc RPM: Allows adjustment of disc RPM for different applications.
Quick-Fix Tool Connector: Enables fast changing of discs, e.g., when switching between steel and stainless steel.
Lighting: LED lights inside the machine.
Magnetic Track: Permanent magnetic track below the feed belt for holding down smaller steel parts.
Dust Extraction Unit: Options available for wet or dry processing to remove harmful abrasive dust.
Aluminum Extraction Kit: Extraction hoods around the discs enhance the dust extraction process for aluminum.
TouchPanel Control: Colored touch panel for setting and displaying machine parameters and storing settings.
Conveyor Tables: Available for processing longer workpieces, with optional linkage of feed speed to that of the machine.
Table Extension: Available for the infeed and/or outfeed side.
Disc Tools:
SoftDisc: Soft pad for deburring mild steel or aluminum.
CompactDisc: Legally-protected disc for removing higher burrs and spatter on stainless steel.
MediumDisc: For edge rounding, available in various grit sizes and hardnesses.
OrbitalDisc: For creating a non-directional finish with the Löwer Orbital device (patent pending).
SmartFlexDisc: Flexible disc for edge rounding foil-coated, zinc-coated, or slightly deformed sheet metal parts.
OxideDisc: For removing the oxide layer on side edges.
