A.picosecond laser glass cutting machine cutting advantages are mainly.

1. High cutting accuracy: laser cutting machine positioning accuracy of 0.003mm, repeat positioning accuracy of 0.002mm.

2. Laser cutting machine slit narrow: the laser beam is focused into a very small spot, so that the focal point at a very high power density, the material is quickly heated to the degree of vaporization, evaporation to form a hole. With the relative linear movement of the beam and the material, so that the hole continuously formed a very narrow width of the slit, the kerf width is generally 0.003-0.005mm.

3. Laser cutting machine cutting surface smooth: cutting surface without burrs, the minimum chip surface of the kerf can be controlled at 0.01mm.

4. Laser cutting machine speed: linear cutting speed of up to 500mm / s, corner cutting speed of up to 300mm / s, much faster than the speed of wire cutting.

5. Laser cutting machine cutting quality: no contact cutting, the cutting edge is very little affected by heat, basically no thermal deformation of the workpiece, completely avoid the collapse of the edge formed when the material punching and shearing, the cut seam generally does not require secondary processing.

6. No damage to the workpiece: the laser cutting head does not come into contact with the surface of the material to ensure that it does not scratch the workpiece.

7. Not affected by the shape of the workpiece: laser processing is flexible, can process any graphics, can cut pipes and other profiles.

8. Save mold investment: laser processing does not need mold, no mold consumption, no need to repair the mold, save the time to replace the mold, thus saving processing costs, reduce production costs, especially suitable for the processing of large products.

9. Save material: With computer programming, you can cut different shapes of products to maximize the utilization of materials.

10. Improve the speed of sample leaving the factory: After the product drawing is formed, laser processing can be done immediately, and the new product can be obtained in kind in the shortest time.

11. Safety and environmental protection: laser processing less waste, low noise, clean, safe, pollution-free, greatly improving the working environment.

B, the main features.

1. picosecond laser electric-optical conversion efficiency, conversion efficiency of 30% or more, can significantly save power consumption at work, save operating costs, to achieve the highest production efficiency.

2. The picosecond laser requires only electrical energy to operate, and no additional gas is needed to produce laser, which has the lowest operation and maintenance cost.

3. The output wavelength of picosecond laser is 1.064 microns, which is 1/10 of CO2 wavelength. The output beam quality is good and the power density is high, which is very beneficial to the absorption of metal materials and has excellent cutting and welding ability, thus making the processing cost the lowest.

4. The cutting head contains protective lenses, so that the consumption of valuable consumables such as focusing mirrors is extremely low.

5. Cutting glass thickness up to 25mm.