Views: 0 Author: hu Publish Time: 2021-09-24 Origin: dapeng
When using a fiber laser cutting machine, under the premise of ensuring its cutting quality, it will do everything possible to reduce its loss. Is there any way to reduce its loss?
Before turning on the fiber laser cutting machine, push the beam to move forward and backward by hand. When you finish the work of the day, you should carefully clean up the waste and debris in the machine, so that the machine motion system can be prevented from being damaged by foreign objects. Clean up its moving parts to keep the machine in good working condition. The specific methods are as follows:
1. Put a little lubricating oil on the screws, including the screws on the laser tube support and the first reflector, which can facilitate the disassembly and assembly during maintenance. Note: Do not add lubricating oil to timing belts, drag chains, air pipes, motors, sensors, lenses, and wires.
2. No items can be placed in the machine to avoid unnecessary damage to the machine.
3. Clean the dust and foreign matter on the metal oil tanker, metal shaft, sliding block and linear guide with cotton cloth, then add lubricating oil, and perform empty reciprocating motion. The working mode of the fiber laser cutting machine is mainly cutting, which is applied to the cutting of metal. The diameter of the laser beam of the laser cutting machine can reach 0.1 mm, and the cutting diameter on metal materials can reach about 0.2 mm. Therefore, the cutting pattern is very accurate. It not only improves the artistic taste and technical content of sheet metal processing. , But also increased profit margins. Therefore, when operating the fiber laser cutting machine, you must cherish and regulate the operation, so that the equipment can better serve you.