2000W Fiber Laser Tube Cutting Machine Dual Chuck + Side-Mounted Loading System

Product Name: Fiber Laser Tube Cutting Machine
Model: G12-7012B
Laser Power: 2000W

Key Features:

• High Speed: Competitive advantages in chuck speed, cutting efficiency, standard configurations, and overall machine pricing.

• Material Saving: Ultra-short tailing (40mm), setting an industry record and improving material utilization.

• Wide Compatibility: Supports tube diameters from Ø10~120mm; compatible with round, square, oval, and irregular tubes. Especially suitable for thin-walled tubes.

• High-Precision Chuck: One-time clamping, no need to replace jaws. Precision guaranteed over time.

• Automatic Loading: Side-suspended structure with semi-automatic loading machine. Loading can be performed without stopping the machine, enabling 24/7 operation.

• Low Cost: No high-cost consumables. Main operating costs include electricity, protective lenses, and copper nozzles (~13-15 RMB/hour).

---

Key Component Configuration:

---

Structural Components:

• Machine Bed: In-house developed, Suzhou / 8.5 meters, stress-relieved by high-temperature annealing

• Chucks: QL-120 Pneumatic Chucks / Continuous Air Supply Clamping

• Support Racks: 4 servo floating supports / Load capacity: 50kg

• Semi-Automatic Loader: 3 conveyors, holds 5 tubes for continuous loading

• Unloading System: Frame capacity 20kg/m, max length 2.0m

---

Software System:

• CNC System: Bochu Bus Control System / Shanghai

• Nest Software: Bochu 3D Tube Cutting Software / Shanghai

Other:

• Operation Side: Left-handed configuration (standard)

• Packing & Shipping: Standard packaging (included)

Note: Machine requires industrial power 380±5V. Voltage stabilizer may be needed depending on site conditions.

---

Component Technical Specifications:

Laser Source:

• Power Output: 2000W

• Mode: Fiber Continuous

• Core Diameter: 50μm

• Cooling: Water Cooling

• Material Compatibility: Carbon Steel, Stainless Steel, Aluminum Alloy, Brass, Copper

Machine Bed:

• Structure: Tube & Plate Welding

• Length: 8.5 meters

Chuck:

• Model: QL120 Pneumatic

• Load Capacity: 50kg

Cutting Head:

• Focus Focal Length: 125mm

• Collimation Length: 100mm

• Focus Adjustment Speed: 100mm/s (No Manual Focus)

• Assist Gas Pressure: ≤3Mpa

Water Chiller:

• Coolant: Distilled or Deionized Water

• Temperature Settings: Normal Water 30°C / Cooling Water 20°C (Adjustable)

• Temperature Control Accuracy: ±0.1°C

• Flow Rate: 10L/min

• Head: 20m

---

Machine Technical Parameters:

General:

• Platform: 120 Series Compact

• Dimensions: 9600×3300×2300 mm

• Weight: 4.2T

• Power Consumption: 20–25 KW

• Operating Temperature: 0–40°C

Processing Range:

• Round Tube: Ø10–Ø120mm

• Square Tube: □10–□80mm

• Cutting Kerf Width: 0.1–0.2mm

Travel Range:

• One-time Clamping: Ø10–Ø120mm

• Y/X/Z/U Axis: 7000 / 150 / 250 / Infinite Rotation

Precision & Speed:

• X/Y Axis Positioning Accuracy: ±0.03/1000mm (±0.06 for 7000mm)

• Repeat Accuracy (X/Y): ±0.03mm

• U Axis Repeat Accuracy: ≤5 arcmin

• U Axis Max Rotation Speed: 160 rpm

• Max Acceleration (X/Y): 1.5G

• Max Idle Speed (X): 100 m/min

• Max Idle Speed (Y): 160 m/min

Loading Parameters:

• Manual Load Length: 7000mm

• Auto Load Length: 5800–6450mm (Custom: 5000–7000mm)

• First Load Cycle: ≤50s, Subsequent: ≤18s

• Loader Capacity: 300kg

• Max Tube Weight (Manual/Auto): 50kg

Unloading Parameters:

• Tail Length: 40mm

• Max Unload Length: 2000mm (Optional 4000mm)

---

Utility Requirements:

Power:

• Voltage: 380–400V / 50Hz / 3 Phase 5 Wire

• Stabilizer recommended if voltage fluctuation >5%

• Minimum Power Supply: ≥40KVA

• Ground Resistance: ≤3Ω

Cooling Water:

• Type: Distilled or Deionized

• Volume: 20L / Conductivity <10μs

Assist Gas:

• Oxygen: ≥99.6% purity / 1.0MPa / ≥1m³/min (for carbon steel)

• Nitrogen: ≥99.99% purity / 2.5MPa / ≥2.5m³/min (for stainless steel)

• Air: ≥1.3MPa / ≥1.8m³/min (with compressor, dryer, 4-level filtration 0.01μm)

Installation Environment:

• Temperature: 5–30°C

• Humidity: <70%

• Stable Foundation: No vibrations, no subsidence

• Avoid electromagnetic interference from arc welders, EDMs, etc.