300W Air-cooled Laser Cleaning Machine Pulsed Laser Cleaner Machine Metal Rust Paint Oil Stains Coating Remove Lightweight Class 4

300W Laser Rust Removal Pulsed Laser Cleaning Machine – Model: FL-A300

110-220V Air-Cooled Portable Handheld Cleaner for Metal Rust, Paint, Oil, Graffiti, Automotive Restoration (Class 4)

Product Introduction

The FL-A300 300W Pulsed Laser Cleaning Machine by WTTTOOLS is a high-efficiency, portable, and eco-friendly surface cleaning solution. Equipped with a high-quality pulsed fiber laser source, it can safely remove rust, paint, oil, grease, coatings, oxide layers, plating, adhesive residues, graffiti, and other surface contaminants without damaging the base material.

Model: FL-A300
Laser Power: 300W
Wavelength: 1070±10 nm
Operation Mode: Pulsed
Scanning Width: 0–130 mm
Input Voltage: AC 110–220V ±10%
Cooling Method: Air-Cooled
Machine Size: 22.83 × 16.93 × 24.8 in (≈0.15 m³)
Net Weight: 114 lbs / 52 kg
Laser Level: Class 1
Output Power: 0.39 mW

---

Compact and User-Friendly Design

• Portable & Lightweight: Small volume (0.15 m³) and ergonomic design for comfortable use.

• Mobility: Equipped with 4 wheels for easy movement and 5-meter fiber cable for extended reach.

• Laser Gun Holder: Secure side bracket for safe storage and quick access during operation.

• Touchscreen Interface: 9.8-inch touchscreen for easy parameter adjustment.

---

High Efficiency & Precision

• Double-Wobble Cleaning Head: Up to 130 mm scanning width for fast, uniform, and precise cleaning.

• Adjustable Parameters: Laser power, pulse frequency, and scan speed customizable for different materials.

• Preset Cleaning Programs: 6 built-in processes plus 3 custom modes for versatile cleaning tasks.

• User-Friendly Operation: Intuitive touchscreen interface simplifies setup and operation.

Technical Specifications

---

Key Features

• 300W Pulsed Fiber Laser Output
  High peak power pulses ensure efficient removal of surface contaminants while protecting the substrate.

• Air-cooled Design
  No water chiller required. Compact structure, low maintenance, ideal for on-site and mobile applications.

• Handheld & Portable
  Lightweight laser cleaning gun with ergonomic design allows long-time operation and flexible use.

• Non-contact & Non-abrasive Cleaning
  No mechanical stress, no chemical agents, no secondary pollution.

• Multiple Scanning Modes
  Supports linear, rectangular, circular and custom scan patterns to match different cleaning tasks.

• Easy Operation
  Intelligent control system with adjustable parameters (power, frequency, scan width, speed).

• Energy-efficient & Eco-friendly
  No consumables such as sand, chemicals or solvents; clean and green technology.

---

Technical Specifications (Typical)

• Laser Power: 300W (Pulsed)

• Laser Type: Pulsed Fiber Laser

• Wavelength: ~1064 nm

• Cooling Method: Air Cooling

• Operation Mode: Handheld / Portable

• Scanning System: High-speed galvanometer scanner

• Power Supply: AC 110V / 220V, 50/60Hz

• Fiber Length: 5 m (customizable)

• Machine Weight: Approx. 20–30 kg (depending on configuration)

---

Applications

• Rust removal on steel, carbon steel, stainless steel and iron

• Paint and coating stripping

• Oil, grease and dirt cleaning before welding or coating

• Oxide layer removal after heat treatment or welding

• Mold and tooling cleaning

• Automotive parts restoration

• Shipbuilding, railway and steel structure maintenance

• Cultural heritage and surface restoration (non-destructive cleaning)

---

Advantages Compared with Traditional Cleaning

• No damage to base material

• No consumables, low operating cost

• High precision and controllability

• Safe, clean and environmentally friendly

• Suitable for complex shapes and precision parts

---

Ideal For

Manufacturers, maintenance companies, workshops, automotive repair, metal fabrication plants, shipyards and on-site service providers seeking a portable, efficient and professional laser cleaning solution.