Automatic loading and unloading laser marking machine for block parts
Product Description
Automatic loading and unloading laser marking machine for block parts
Independent block-type parts automatic loading and unloading system, can be independently installed on our standard marking, used as an option;
Nameplate automatic loading and unloading marking machine, using Weilun touch screen as man-machine interface, servo motor plus screw guide rail and cylinder as actuator; equipment can do intermittent feeding, can save labor, and work time About 20-40 minutes (estimated time); the advantage of this model is that the customer can install this mechanism on the existing equipment, which is simple and convenient;
The main workflow is as follows:
Turn the machine back to zero → set the corresponding motion parameters → start the device → wait for the feeding mechanism to feed → the product is in place → the robot arm grabs → the marking station secondary positioning → start marking → marking completion → the robot arm reclaiming Material → repeat the above actions → one disk is completed → each station reset → alarm → waiting for loading
Large format fiber laser marking machine
* The fiber laser output laser is used, the electro-optical conversion efficiency is high, the beam quality is good, and the volume is small and maintenance-free;
* Good stability, high pulse frequency, uniform engraving lines, fine patterns; strong engraving depth;
* The marking range can be adjusted at any time according to the accuracy requirements;
* Fast marking speed and large format to meet high standards.
Widely used in buttons, glasses, craft gifts and other related industries. Crystal, ceramic, marble, composite materials, etc.