Deburring And Oxide Removal Machine for Sheet Metal 800mm Wide Metal Parts Finishing Machine for Laser Cutting
Product Description
MSP-L800 Dry-Type Deburring and Sanding Machine
1. Processing Scope
Applicable Materials: Stainless steel, carbon steel, aluminum plates, copper plates, and various non-ferrous metals.
Functions:
The MSP-L800 is a dry-type machine that combines one sanding belt station and four sets of planetary universal abrasive flap brush stations. It is designed for:Deburring edges and holes
Achieving surface finishing: brushing, oxide scale removal, polishing
It removes burrs produced by stamping, shearing, laser cutting, plasma cutting, and flame cutting in a single pass. All edges and holes are evenly rounded (small R angle), ensuring safe, high-quality parts.
2. Working Principle
A sanding belt station removes heavy slag and large burrs from the surface.
Followed by 4 flap brush heads, each pair rotating in opposite directions while revolving as a group. These create high-speed centrifugal forces for grinding, scraping, trimming, and polishing edges and holes.
Results in 0.2–0.5 mm R-radius edges, without affecting part dimensions.
Each station can work independently:
Sanding belt only: Brushed surface finishing, oxide removal, and deslagging.
Brushes only: 360° deburring, ideal for laser-cut or CNC-punched film-covered sheet metal—burrs removed without damaging the protective film or surface.
3. Advantages
High productivity: Continuous feed system supports high-volume orders.
Superior consistency: Automated surface treatment greatly outperforms manual deburring.
Lower cost: Much lower cost per unit area than manual processing.
Safe & eco-friendly: Equipped with wet-type dust collector, reduces fire risk, filters metal powder, and provides a clean work environment.
4. Technical Specifications
| Parameter | Value |
|---|---|
| Max. working width | ≤800 mm |
| Thickness range | 0.5 – 80 mm |
| Minimum part size | 50 mm × 50 mm (for solid/non-perforated parts) |
| Total machine power | 30.25 kW (excluding dust collector) |
| Sanding belt size | Φ1910 mm × 800 mm |
| Brush size | Φ300 mm × 300 mm |
| Feed speed | 0.5 – 6 m/min (VFD adjustable) |
| Sanding belt line speed | ~18 m/s |
| Brush self-rotation speed | 8 – 26 m/s (VFD adjustable) |
| Brush planetary speed | 1 – 15 rpm (VFD adjustable) |
| Planetary axis heads | 1 planetary, 4 self-rotating |
| Servo thickness control | 0.01 mm precision |
| Brush compensation accuracy | 0.01 mm servo-adjusted |
| Abrasive media | Sanding belt + flap brush |
| Dust extraction capacity | 4000 m³/h |
| Machine size (L×W×H) | 2650 mm × 1650 mm × 2150 mm |
| Machine weight | Approx. 2.2 tons |
5. Component & Brand List
| Component | Specification / Model |
|---|---|
| Sanding contact drum | Φ150 mm × 800 mm |
| Sanding belt motor | 7.5 kW |
| Brush rotation motor | 4 kW |
| Brush planetary reducer motor | 750 W |
| Brush lift servo motor | 750 W |
| Conveyor belt | Φ5380 mm × 800 mm |
| Conveyor drive motor | 1.5 kW |
| Conveyor reducer | Hypoid RV75 |
| Worktable lift servo motor | 750 W |
| Belt tracking sensor | — |
| Belt tensioning cylinder | ACQ80×30 |
| Belt correction cylinder | SDA63×5 |
| Brush rotation inverter | 4 kW |
| Brush planetary inverter | 0.75 kW |
| Conveyor inverter | 1.5 kW |
| Vacuum fan inverter | 15 kW |
| Vacuum suction fan | 15 kW |
| Bearings | High-speed |
| Low-voltage electricals | — |
| PLC control system | — |
| Touchscreen display | 7-inch |
6. Installation Requirements
Installation space: At least 4 m × 3.5 m
Power supply: 380V, 50Hz ±10%
Compressed air: Clean and stable compressed air source