FSCUT1000 low power laser cutting System
Publish Time: 2021-04-19 Origin: dapeng
FSCUT1000 series is a low-cost fiber laser cutting solution for small power range application. FSCUT1000 is simplified from FSCUT2000 system, it integrates motion control and height control unit in one, is a cost-effective laser cutting control system.
Hardware
Technical Data
Model
FSCUT1000
Control card
BMC1603
I/O terminal board
BCL4562
Motor control signal
X/Y1/Y2 axes pulse output, maximum frequency 3MHz
Z axis analog output, -10 ~+10V
X/Y/Z axes access encoder feedback, maximum sampling frequency 10MHz
Dedicated inputs
6 limit inputs: X/Y1/Z axes +/- limit
Common inputs
6 inputs: low-level active, supports NO and NC;
Software
CypOne Laser Cutting Control Software
Interface type
32-bit PCI bus, 132MB/S
Power supply
24V DC/2A
Work environment
Temperature: 0-55℃
Humidity: 5%-95%(no condensation)
Dedicated outputs
2 DA outputs: 0~10V，50mA
1 PWM output: 5V/24V for option, precision of 50KHz (0.1%)
Common outputs
8 outputs: relay output, 30V DC/5A
Benefits
Cutting technique
Support 2-stage piercing technique.
Support domestic laser brands of Raycus, Max and Mars etc.
Support Fly-cut, frog-leap, auto-focus adjustment and dual-shuttle functions.
Don't support advanced functions including find workpiece edge and auto-nest etc.
Don't support advanced technique functions including cooling point, ring-path for pointed workpiece, bend relif etc.
Control performance
Trajectory accuracy 0.05mm, position accuracy 0.01mm.
Maximum cutting speed 100m/min, maximum travel speed 100m/min.
Maximum acceleration 1G.
Don't support dual-drive gantry position error alarm and screw pitch error compensation.
Capture limit signal in return origin process.
Application
Widely applied in advertising industry and low power fiber laser cutting machine within 1000W that mainly involved in thin metal sheet production.