FSCUT3000S tube laser cutting system
Publish Time: 2021-04-21 Origin: dapeng
FSCUT3000S system is designed for tube cutting control, support standard tube(retangle, circle, oval, ellipse and obround etc.) , free form , and steel channels(T/U/H/L shape) production of high precision and efficiency.
Hardware
Technical Data
Model
FSCUT3000S
Software
TubePro tube cutting software/ CypCut sheet cutting software
Control card
BMC1805
Interface type
32-bit PCI bus, 132MB/S
I/O terminal board
BCL3766
Power supply
24V DC/2A
Motor control
X/Y1/Y2/W axis pulse output, heighest frequency 3MHz
X/Y1/Y2 axis access encoder feedback, highest sampling frequency 10MHz
W axis port can be assigned to rotary axis or autofocus unit
Work environment
Temperature: 0-55 ℃
5%-95% (no condensation)
Dedicated input
8 limit inputs:Positive and negative limit for X/Y1/Y2/W axis
4 origin inputs:X / Y1 / Y2 / W axis origin
Dedicated output
2 DA: 0~10V,50mA
1 PWM with 5V/24V for option, precision of 5KHz (0.1%)
Common input
15 inputs: 12 are low-level active, 3 inputs can jump-wire switch to high-level active.
Common output
8 relay output, load capacity 250V AC/5A, 30V DC/5A
12 thyristor output, DC 24V/500mA
Benefits
Cutting technique
Support offset tube center error in production to improve through holes cutting precision.
Support steel channels cutting.
Suppport seperate technique for corner cutting.
Support auto loading/unloading process, cycle production and automatic tube feeding.
Support all functions of FSCUT2000 system.
Control performance
Open-loop control system, Friendess 5th generation motion control algorithms.
Trajectory accuracy 0.02mm, positioning accuracy 0.001mm, repeatability 0.003mm.
Access encoder feedback in real time, to compare command and machine toolpath.
Application
Applied in tube cutting or tube-sheet combo machine. Widely used in furniture, display shelf, architecture, and sport equipment industries.