High Power CNC Fiber Laser Cutting Machine with Automatic Pallet Changer And Closed Body

How Laser Cutting Works:

Laser cutting is a technology that uses a laser to cut materials, and is typically used for sheet metal fabricators, but is also starting to be used by schools, small businesses, and hobbyists. Laser cutting works by directing the output of a high-power laser most commonly through optics. The laser optics and CNC (computer numerical control) are used to direct the material or the laser beam generated. A typical commercial laser for cutting materials would involve a motion control system to follow a CNC of the pattern to be cut onto the material. The focused laser beam is directed at the material, which then either melts, burns, vaporizes away, or is blown away by a jet of gas,  leaving an edge with a high-quality surface finish. Industrial laser cutters are used to cut flat-sheet material as well as structural and piping materials.

DP Laser Advantage Features:

1) Cost saving on power consumption/ only 20-30% of co2 laser cutting machine

2) Higher cutting speed 120m/min and Imported servo motor and gearing system ensure precision cutting

3) Easy of operation

4) Error detection, diagnosis & solution

5) Scan cutting: Short distance cutting without head lifting

6) Automatic search edge function: if work piece put slanting, machine can auto detect it and automatic adjust cutting, so less waste of material and no need to move the metal sheet

7) Memory cutting: Once power off suddenly, the software has memory of cut stop point, when power on, the machine will continue cutting from the break point.

8) Adopts Proportional Valve: Control the air pressure automatically replace of manually, save much time.

9) Safety Features : Pause / Emergency Stop (can we pause or stop machine during cutting )

10) Stable working table: DAPENG cutting bed around 6.5 tons in weight, Dual drive, aging treatment, stress relief test, make sure longe time lasting without changing shape.

11) Automatic pallet changer, saving loading and unloading time.

Applicable Materials:
Stainless steel, Mild steel, alloy steel, silicon steel, spring steel, aluminum, aluminum alloy, galvanized sheet and other metal pipes and tubes.

High Power CNC Fiber Laser Cutting Machine with Automatic Pallet Changer
SPECIFICATIONS:

DP 3015 FIBER LASER CUTTING MAIN COMPONENTS LIST: