High quality CO2 laser cutting machine in China

CO2 laser cutting machine

Carbon dioxide laser is a gas molecule laser, with CO2 gas as the working material and nitrogen, helium, xenon, and hydrogen as auxiliary gases. Due to its energy conversion efficiency of up to 25%, it is often used as a high-power output laser. The wavelength of the carbon dioxide laser is 10.6 microns, which is impossible to see infrared light. It has good stability and is widely used.

Single head CO2 laser cutting machine

Working principle and characteristics:

The discharge tube of a CO2 laser is filled with a mixture of gases such as CO2, N2, He, etc. The ratio and total pressure can vary within a certain range (usually CO2: N2: He=1:0.5:2.5, with a total pressure of 1066.58pa). Any molecule has three different forms of motion: firstly, the motion of electrons within the molecule determines the electronic energy state; secondly, the vibration of atoms within the molecule, where the atoms oscillate periodically around their equilibrium position, This motion determines the vibrational energy state of molecules, and the rotation of molecules determines their rotational energy state. CO2 lasers generate lasers by utilizing the transitions between the vibrational and rotational energy levels of CO2 molecules.

Double head CO2 laser cutting machine

Suitable materials:

Wooden products, paper, leather, fabric, organic glass, epoxy resin, acrylic, wool, plastic, rubber, ceramic tiles, crystals, jade, bamboo products and other non-metallic materials.

High power carbon dioxide laser machines can also cut metal materials.

Applicable industries:

This type of machine is suitable for industries such as clothing, leather, cloth toys, computer embroidery and cutting, electronic appliances, models, handicrafts, advertising and decoration, packaging and printing, and paper products.

WORKING AREA- 600*900
TUBE POWER - T-2
RF- 100 WATT - HY
MOTOR AND DRIVE- UVW THREE PHASE (LEADSHINE/ YAKO)
BLOWER - 750 W
COMPRESSOR- 380W HEALIA (TWO HEAD MACHINE NEED 2 PCS )
MIRROR- 30*3 SILVER COATED
LENS - 50.8 FL (BEST QUALITY USA COATED)
AIR PIPE LINE - 8 MM IN EACH MACHINE
WATER SENSOR- YES
PULLY - BRASS MATERIAL
BELT- 18 MM
CONTROLLER - RDC
BLOWER PIPE - GOOD QUALITY FABRIC MATERIAL
BED / WORKINT TABLE- HONEY COMB (SEPRATE FRAME )+KNIFE BLADE (EACH GAP 10 MM)  SEPRATE FRAME
SENSOR- OMRON JAPAN
POWER SUPPLY - OMRON / MEANWELL
CHILLER- S&A (AS PER HEAD) 5200 SINGLE / DUAL HEAD
CUPPLER - 4 PCS IN EACH MACHINE

WORKING AREA- 1400*1000
TUBE POWER - T-4
RF- 130 WATT - HY
MOTOR AND DRIVE- UVW THREE PHASE (LEADSHINE/ YAKO)
BLOWER - 750 W
COMPRESSOR- 380W HEALIA (TWO HEAD MACHINE NEED 2 PCS )
MIRROR- 30*3 SILVER COATED
LENS - 50.8 FL (BEST QUALITY USA COATED)
AIR PIPE LINE - 8 MM IN EACH MACHINE
WATER SENSOR- YES
PULLY - BRASS MATERIAL
BELT- 18 MM
CONTROLLER - RDC
BLOWER PIPE - GOOD QUALITY FABRIC MATERIAL
BED / WORKINT TABLE- HONEY COMB (SEPRATE FRAME )+KNIFE BLADE (EACH GAP 10 MM)  SEPRATE FRAME
SENSOR- OMRON JAPAN
POWER SUPPLY - OMRON / MEANWELL
CHILLER- S&A (AS PER HEAD) 5200 SINGLE/ DUAL HEAD
C UPLLER- 4 PCS IN EACH MACHINE

WORKING AREA- 1600*1000
TUBE POWER - T-6
RF- 150 WATT - HY
MOTOR AND DRIVE- UVW THREE PHASE (LEADSHINE/ YAKO)
BLOWER - 750 W
COMPRESSOR- 380W HEALIA (TWO HEAD MACHINE NEED 2 PCS )
MIRROR- 30*3 SILVER COATED
LENS - 50.8 FL (BEST QUALITY USA COATED)
AIR PIPE LINE - 8 MM IN EACH MACHINE
WATER SENSOR- YES
PULLY - BRASS MATERIAL
BELT- 18 MM
CONTROLLER - RDC
BLOWER PIPE - GOOD QUALITY FABRIC MATERIAL
BED / WORKINT TABLE- HONEY COMB (SEPRATE FRAME )+KNIFE BLADE (EACH GAP 10 MM)  SEPRATE FRAME
SENSOR- OMRON JAPAN
POWER SUPPLY - OMRON / MEANWELL
CHILLER- S&A (AS PER HEAD) 5200 SINGLE / DUAL HEAD
CUPPLER- 4 PCS IN EACH MACHINE