How to improve marking efficiency in fiber laser marking process

The purpose of fiber laser marking machine is to bring higher production efficiency to enterprises and create higher value, so how to improve the marking speed of fiber laser marking machine? Let me introduce to you next.

1. Influencing factors

The main factors of fiber laser marking machine are divided into two aspects: internal factors and processed workpieces.

The internal factors are mainly laser frequency, laser spot mode and beam divergence angle, laser power, reasonable optical shaping and auxiliary gas material during processing. The internal factors are mainly paid attention to when selecting the models in the early stage, and you should follow the advice of the laser engineer to purchase. Another factor that the customer needs to pay attention to when processing is mainly the marking density, marking area, marking depth and laser spot size.

2. Marking density

In the case of the same format, the same spot, and the same depth, the higher the marking density, the slower the corresponding marking speed. The reason is that the density directly increases the marking area.

3. Marking format

Because the deflection area of the large-format marking galvanometer is increased, the marking speed of the large-format marking is slower than that of the small-format marking.

Fourth, marking depth

According to demand, if you need to deepen the marking depth, you need to adjust the parameters of the fiber laser marking machine, increase the power, current and other factors of the fiber laser marking machine, so the marking speed will be affected in these processes.

5. Laser spot size

The smaller the light spot corresponds to the smaller the marking volume, therefore, the larger the light spot, the faster the marking speed.