How to improve marking efficiency of fiber laser marking machine

The purpose of fiber laser marking machine is to bring higher production efficiency to enterprises and create higher value, so how to improve the marking speed of fiber laser marking machine? Next, the technical staff of the laser marking machine manufacturer will introduce to you.

1. The main factors affecting the fiber laser marking machine are divided into internal factors and workpieces.

The internal factors are mainly laser frequency, laser spot mode and beam divergence angle, laser power, reasonable optical shaping and auxiliary gas materials during processing. The internal factors are mainly paid attention to when selecting the models in the early stage, and you should follow the advice of the laser engineer to purchase. Another factor that the customer needs to pay attention to when processing is mainly the marking density, marking area, marking depth and laser spot size.

2. Marking density

In the same format, the same spot, and the same depth, the higher the marking density, the slower the corresponding marking speed. The reason is that the density directly increases the marking area.

3. Marking format

Because the deflection area of the large-format marking galvanometer is enlarged, the marking speed of large-format is slower than that of small-format.

Four, marking depth

According to the demand, if the depth of marking needs to be deepened, the parameters of the fiber laser marking machine need to be adjusted, and the power, current and other factors of the fiber laser marking machine need to be increased. Therefore, the marking speed will be affected in these processes.

5. Laser spot size

The smaller the light spot, the smaller the marking volume. Therefore, the larger the light spot, the faster the marking speed.