Scanhead with two red light 10mm Galvanometer for fiber laser marking machine
Product Description
Feature:
1. The most cost-effective high speed galvanometer scanner.
2. The input aperture is 10 mm.
3. It has a superior performance of zero drift, higher speed, smaller size, and stronger anti-interference.
Motor Specification
Working Temperature | 0-45℃ |
Linearity | 99.9% |
Setting Time | ≤ 0.5ms |
Scale Drift | <40PPM/℃ |
Zero Drift | < 15μRad./℃ |
Long-term Drift Over 8 Hours | < 0.5mRad |
RMS Current | 3.0A |
Peak Current | 15A(Max) |
Maximum Scan Angle | ±15° |
Storage Temperature | -10 to +60℃ |
Resolution | 12μrad |
Repeatability | 8μrad |
Input Aperture | 10.0mm |
Beam Displacement | 13.4mm |
Motor Weight | 120g |
Frequency | ≤700Hz |
Driver Board Specification
Input Voltage | ±15VDC |
Interface Signal Digital | XY2-100 |
Position Signal Input Resistance | 1K±1% Ω |
Position Signal Input Scale Factor | 0.33V/° |
Position Signal Output Scale Factor | 0.33V/° |
Working Temperature | 0-45℃ |
Dimension(L×W×H) | 75×55×30mm |
The main parts are: Raycus source, IPG source, scanhead, control card, Rotary, XYZ working table, Lifting, Protective eyewear, Field lens.
1.Laser source: Raycus-20w,30w,50w,100w; IPG-20w,30w,50w; Synrad CO2 source-30w, 60w.
2. Scanhead: Spot size-10mm
3. Rotary device: 80mm
4. Working table: XY or XYZ
5. Control card: V2, V4
6. Field lens: f=100(80*80mm), f=160(100*100mm), f=210(150*150mm), f=254(180*180mm),
f=380(250*250mm),f=420(300*300mm)
7. Protective eyewear: 1064nm
8. Power supply: 5V(for control card), 15V(for Scanhead), 24V(for laser source)
9. Red light lens & Red light part.
10. Machine box: Desktop style, Split style, Portable style, Hand-held style.
11. Lifting: 50cm, 80cm, 100cm