Technical Difficulties of Fiber Laser Cutting Machine for Cutting Thick Plates

Technical Difficulties of Fiber Laser Cutting Machine for Cutting Thick Plates

The level of CNC laser cutting machines is constantly improving, fiber laser cutting machines are widely used in the metal sheet cutting industry, and the requirements for laser cutting machines are getting higher and higher, which requires laser cutting machine manufacturers to inform laser cutting machines when selling laser cutting machines. Technical difficulties in cutting thick plates.

High-power laser cutting machines are particularly important in the sheet metal processing industry. If you want to cut sheets with good quality, high cutting accuracy, and no burrs, you need to pay attention to the following points when operating the laser cutting machine. When the desktop laser cutting machine cuts thick plates, the slits are relatively small, which is easy to cause heat loss and cause more burrs. The greater the thickness of the sheet, the greater the heat conduction loss of the fiber laser cutting machine, and the lower the cutting speed.

When the CNC laser cutting machine cuts thick plates, the beam diameter is small, and the cutting seam of the cutting machine is small, so it is not conducive to cutting and discharging slag. Therefore, when cutting thick plates, the large-scale laser cutting machine must ensure the appropriate slit width, the auxiliary gas quality and air pressure control of the plate laser cutting machine, so as to ensure the cutting quality of the latter plate.