These two materials are the most commonly used in sheet metal working! Laser cutting

These two materials are the most commonly used in sheet metal working! Laser cutting

There are many materials that we can use in the process of sheet metal processing. Usually we choose the most suitable material according to the processing requirements of the product, and also choose different processing materials according to the characteristics of the processed workpiece. In addition, there are many different types of sheet metal materials, many of which have a wide range of machining processes, so when choosing a material to work with, it is important to look at which material has fewer processes, is easier to work with and is more patient, and then choose the corresponding material from there. The next two most commonly used materials for sheet metal processing are described below.

1, cold-rolled sheet

In sheet metal processing work, the application of cold-rolled sheet is very much, especially the cold-rolled thin steel plate is very much, very common in processing, mainly because the quality of this material is better, the processed products are also better to use. And it is also easier to grasp the size in the process of processing. This material is generally annealed during processing, so its mechanical properties are also very superior, and it has been widely used in many areas of life at present.

2, stainless steel plate

The application of stainless steel plate than cold-rolled plate, we live in the home, bathroom and other areas are using this material, this material is very convenient to use, in general, do not need to do surface treatment, this material is generally in the sanitary article requirements of the higher unit application is the most, health care is very convenient, more importantly, this material is processed out of the product performance is very smooth, the surface looks It is also more aesthetically pleasing.

Compared to the versatile operation of a fibre laser cutting machine.

1. Although the flame cutting investment is lower, the thermal expansion is too great when cutting plates, which affects the cutting quality of the material and wastes material, and the processing speed is not as fast as the fibre laser cutting machine. However, for thick plate cutting, flame cutting still has the advantage.

2. Plasma cutting accuracy than flame cutting, but cutting the plate when the thermal expansion is large, the slope is large. Compared with the precision cutting of the original laser cutting machine, raw materials are easily wasted.

3. High-pressure water cutting is not limited to the material, but the cutting speed is slow and consumption is higher than that of the fibre laser cutting machine.