 |
| Quantity: | |
|---|---|
FL-E200
The 200W Handheld Laser Cleaning Machine is an air-cooled pulsed laser cleaning system specially designed for automotive interior molds.
It provides efficient, non-destructive cleaning of plastic residue, burnt deposits, oil, grease, oxidation layers, and release agent buildup commonly found on injection molds used for automotive interior components.
With its compact structure, portable design, and stable 200W pulsed laser output, this machine is ideal for on-site mold maintenance, helping manufacturers improve mold cleanliness, surface quality, and production efficiency.
The machine is widely used for cleaning molds producing:
Dashboard components
Door panels and trims
Center consoles
Pillar trims (A/B/C pillars)
Air vent housings
Decorative plastic parts
These molds often accumulate plastic residues, carbonized material, and mold release agents, which can affect surface finish and product quality. Laser cleaning restores molds to optimal condition without disassembly.
The system uses a pulsed fiber laser (1064 nm wavelength).
Laser energy is absorbed by contaminants rather than the mold substrate. The residues rapidly vaporize or detach due to thermal shock and micro-explosive effects, while the mold surface remains undamaged.
This ensures precise, selective, and non-contact cleaning, even on textured or patterned mold surfaces.
No abrasion, no mechanical wear
Does not damage mold texture or cavity geometry
Preserves surface accuracy and finish
Removes plastic residue and burnt material
Eliminates oil, grease, and release agent buildup
Restores mold surface consistency
Compact air-cooled structure
Easy to move and operate inside workshops
Suitable for on-line and off-line mold cleaning
No chemicals or solvents
No consumables
No wastewater or secondary pollution
Adjustable laser parameters for different contamination levels
Consistent cleaning results
Reduced mold downtime and maintenance costs
| Item | Specification |
|---|---|
| Laser Type | Pulsed Fiber Laser |
| Laser Power | 200 W |
| Cooling Mode | Air Cooling |
| Laser Wavelength | 1064 nm |
| Operation Mode | Handheld |
| Cleaning Width | Up to 100 mm |
| Power Supply | AC 220V / 110V, 50–60 Hz |
| Laser Class | Class 4 |
| Machine Type | Portable |
(Specifications may vary based on configuration.)
Tool steel molds
Stainless steel molds
Aluminum mold components
Equipped with safety interlock and emergency stop
Laser safety goggles required
User-friendly control interface
Long laser source lifetime (up to 100,000 hours)
Improved surface quality of interior plastic parts
Reduced defect rate caused by mold contamination
Extended mold service life
Lower maintenance and operating costs
Faster mold turnaround without disassembly
The 200W Handheld Laser Cleaning Machine is a reliable and eco-friendly solution for automotive interior mold cleaning.
It provides precise residue removal without damaging mold surfaces, ensuring stable production quality and meeting the high standards of the automotive industry.
The 200W Handheld Laser Cleaning Machine is an air-cooled pulsed laser cleaning system specially designed for automotive interior molds.
It provides efficient, non-destructive cleaning of plastic residue, burnt deposits, oil, grease, oxidation layers, and release agent buildup commonly found on injection molds used for automotive interior components.
With its compact structure, portable design, and stable 200W pulsed laser output, this machine is ideal for on-site mold maintenance, helping manufacturers improve mold cleanliness, surface quality, and production efficiency.
The machine is widely used for cleaning molds producing:
Dashboard components
Door panels and trims
Center consoles
Pillar trims (A/B/C pillars)
Air vent housings
Decorative plastic parts
These molds often accumulate plastic residues, carbonized material, and mold release agents, which can affect surface finish and product quality. Laser cleaning restores molds to optimal condition without disassembly.
The system uses a pulsed fiber laser (1064 nm wavelength).
Laser energy is absorbed by contaminants rather than the mold substrate. The residues rapidly vaporize or detach due to thermal shock and micro-explosive effects, while the mold surface remains undamaged.
This ensures precise, selective, and non-contact cleaning, even on textured or patterned mold surfaces.
No abrasion, no mechanical wear
Does not damage mold texture or cavity geometry
Preserves surface accuracy and finish
Removes plastic residue and burnt material
Eliminates oil, grease, and release agent buildup
Restores mold surface consistency
Compact air-cooled structure
Easy to move and operate inside workshops
Suitable for on-line and off-line mold cleaning
No chemicals or solvents
No consumables
No wastewater or secondary pollution
Adjustable laser parameters for different contamination levels
Consistent cleaning results
Reduced mold downtime and maintenance costs
| Item | Specification |
|---|---|
| Laser Type | Pulsed Fiber Laser |
| Laser Power | 200 W |
| Cooling Mode | Air Cooling |
| Laser Wavelength | 1064 nm |
| Operation Mode | Handheld |
| Cleaning Width | Up to 100 mm |
| Power Supply | AC 220V / 110V, 50–60 Hz |
| Laser Class | Class 4 |
| Machine Type | Portable |
(Specifications may vary based on configuration.)
Tool steel molds
Stainless steel molds
Aluminum mold components
Equipped with safety interlock and emergency stop
Laser safety goggles required
User-friendly control interface
Long laser source lifetime (up to 100,000 hours)
Improved surface quality of interior plastic parts
Reduced defect rate caused by mold contamination
Extended mold service life
Lower maintenance and operating costs
Faster mold turnaround without disassembly
The 200W Handheld Laser Cleaning Machine is a reliable and eco-friendly solution for automotive interior mold cleaning.
It provides precise residue removal without damaging mold surfaces, ensuring stable production quality and meeting the high standards of the automotive industry.
