Industry News

• Comparison and purchase of fiber cutting machine and CO2 cutting machine

  Cutting is currently one of the most widely used laser industrial processing technologies. Fiber lasers and CO2 lasers are currently the most commonly used laser cutting equipment. As a user, you must first understand the advantages and disadvantages of fiber lasers and CO2 lasers, and then judge th

  Industry News September 22, 2021
• Which laser cutting machine is best to use?

  Which laser cutting machine is best to use? Maybe many customers will have a lot of such questions in the selection, then tell you, the best laser cutting machine is an optical fiber cutting machine.Fiber laser cutting machine is also known as fiber laser cutting machine. Through optical fiber trans

  Industry News September 22, 2021
• Analysis of welding application of a new generation of fiber laser

  On September 7, the "OFweek 2017 (13th) China Advanced Laser Technology and Application Seminar" hosted by OFweek China's high-tech industry portal and undertaken by OFweek Laser Network was officially held in Shenzhen. Huang Hui, the welding industry manager of Enna Laser Technology (Shanghai) Co.,

  Industry News September 19, 2021
• Development and Prospects of Fiber Lasers in China

  Domestic low-power fiber lasers are mainly used in 3C product marking, micro-engraving and other fine processing fields. Domestic medium-power fiber lasers are widely used in the field of metal sheet cutting and welding, and sales are expected to maintain rapid growth in the next few years. Domestic high-power fiber lasers above kilowatts are mainly used in industrial fields such as laser cutting, perforation, welding, etc. With the advancement of light weight in my country's automobile industry and the application expansion of the composite material processing market, high-power lasers have good development prospects. In the next few years, the application hotspots of my country’s laser industry will include laser cleaning (paint removal, oil removal, oxide removal, screw cleaning, rust removal, weld cleaning, mold repair, etc.), laser welding, ultra-fast pulse picoseconds/ Femtosecond laser applications, etc.

  Industry News September 19, 2021
• What is the difference between single-mode and multi-mode fiber lasers

  The module composition of fiber lasers is divided into single-mode and multi-mode. In cutting applications, the focused spot has a great influence on the quality of the cut. The core of single-mode lasers is relatively thin, and the beam quality is better than that of multi-mode, and the energy distribution It has a Gaussian distribution, with the highest energy density in the middle, and the three-dimensional image is a sharp round mountain peak.

  Industry News September 19, 2021
• How to distinguish fiber laser marking machine

  The difference between fiber laser marking machine, how to distinguish various types of fiber laser marking machine, I will introduce to you.1. The laser wavelength is different·Deep UV laser marking machine: 266 nm·Green laser marking machine: 532nm· Lamp pump YAG laser marking machine: 1064nm·Semi

  Industry News September 19, 2021
• Where is the core advantage of fiber laser instead of CO2 laser

  In recent years, fiber laser cutting technology has begun to be widely used in the industry. In 2014, fiber lasers surpassed CO2 lasers to become the largest share of laser sources.Fiber laser cutting not only provides the cutting speed and quality that CO2 laser cutting can achieve, but also signif

  Industry News September 19, 2021
• Laser welding is used in the electronics field

  Principle: Laser welding is a welding process that uses laser action to produce instantaneous melting on the metal surface to connect the metal.　　Features: Due to the continuous development of miniaturization of components, small solder joints, high soldering strength, and small heat-affected zone a

  Industry News September 18, 2021
• Detailed explanation and trend analysis of laser welding process

  Manufacturing microfluidic chips requires a high-precision welding process. Generally, the micro runner cannot be realized by other welding methods, or only costly other non-welding processes can be used. The use of lasers to weld the edges of the micro-runners in parallel enables the runners to be formed while welding. 　　 In addition, laser welding technology can also be used to weld larger devices, such as car taillights or similar commonly used large plastic parts. Even the welding of large products such as TV casings and washing machines is no longer a problem.

  Industry News September 18, 2021
• The future trend of laser welding process

  As a relatively novel joining process, laser welding technology has great potential for innovation. As the price of laser sources drops, it is foreseeable that the application of this technology will become more and more widespread. Now, ordinary consumer products are also joining the ranks of laser

  Industry News September 18, 2021