►The welding seam is smooth and beautiful, reducing the follow-up grinding process, saving time and cost.

The welding seam is smooth and beautiful, reducing the subsequent polishing process, saving time and cost

The third-generation synchrotron radiation source based on the storage ring has become a major scientific platform supporting basic and applied research in physics, chemistry, materials, medicine, and life sciences. The third-generation synchrotron radiation source has many advantages, such as high average brightness, stable pulse energy, and simultaneous support for multi-user operation. However, limited by the principle, it also has shortcomings such as low peak brightness, long pulse length and no longitudinal coherence. In order to overcome these shortcomings of the storage ring light source, people are developing X-ray free electron lasers. At the same time, with the development of diffraction-limited storage ring light sources in recent years, people have begun to explore the feasibility of generating fully coherent free electron lasers based on the storage ring, and some new solutions have been proposed.

Researchers are using this new type of laser with extremely small line width to make more accurate atomic clocks and make more precise measurements of ultra-cold atoms. Researchers believe that by adjusting the composition of the mirror and finding a way to reduce the internal temperature of the resonator, the line width can be further narrowed, even reaching below 1 mHz.

de Lima is currently participating in a new research project, which is supported by the Sao Paulo Research Foundation (FAPESP) in Brazil, which aims to verify the feasibility of the technology in Brazilian factories. In addition, laser welding will also be applied to maraging steel.

Fiber laser cutting machine to create safe food machineryFood machinery is one of the products in direct contact with it during the food production process, and its quality directly affects food safety. A few days ago, the Anhui Provincial Bureau of Quality Supervision found that 4 groups of food pr

Use and maintenance of fiber laser cutting machineThe fiber laser cutting machine is a high-tech large-scale machine in the classification of machinery. The price of this machine is very high when it is purchased, and the professional level of the technicians is also very high in the process of use,

Laser cladding steelmaking continuous casting roll with high wear resistance

Pulsed lasers can be used to selectively clean bonding surfaces or small objects (such as ancient coins), while UV lasers are very suitable for cleaning large components. They can be used to remove liquid residues on CFRP components, or by setting other parameters, they can help remove stubborn paint or rust layers. As a high-tech cleaning tool, laser has great potential.

Current status of laser cleaning industry Market prospect analysis of laser cleaning machineIn the high-end manufacturing industry, in order to ensure the quality of the industrial products during electroplating, phosphating, spraying, welding and assembly, it is necessary to remove the dirt, grease

Traditional cleaning processes, such as mechanical friction cleaning, chemical corrosion cleaning, etc., are very time-consuming, cannot be automated, and usually cause harmful effects on the environment. At the same time, there is no reliable way to measure the cleaning effect. In contrast, laser c

Can laser derusting machine really replace sandblasting cleaning?The laser rust remover is well known to use the principle of laser cleaning to clean the rust layer on the metal surface, and can achieve micro-roughening or non-destructive cleaning, as long as the correct parameters are adjusted.Can

What are the advantages of laser cleaning machine for rust removal?Rust is the inevitable existence of some metal products. In order to make the products beautiful and continue to use, it has to be derusted. The laser cleaning machine was born for this purpose. The laser cleaning machine is effectiv

Continuous laser welding machine CW laser welding is mostly high-power lasers with a power above 500 watts. Generally, such lasers should be used for plates above 1 mm. The welding mechanism is deep penetration welding based on the pinhole effect, with a large aspect ratio, which can reach more than 5:1, fast welding speed, and small thermal deformation. It has a wide range of applications in industries such as machinery, automobiles, and ships. There are also some low-power continuous lasers with power between tens to hundreds of watts. They are used more in plastic welding and laser brazing industries.

How does the laser welding machine perform welding?How does the laser welding machine perform welding? Simply put, what are the welding modes of the laser welding machine? It is understood that there are two welding modes of laser welding machines, thermal conductivity welding and deep penetration w

Laser welding machine It is an equipment used for welding metal materials. According to the welding mode, it can be divided into fiber continuous laser welding machine, laser spot welding machine and automatic laser welding machine. So what materials can the laser welding machine weld? Shuangcheng Laser will give you a detailed introduction below.

With the popularization of UV laser marking machine technology, UV laser marking machines are gradually being used for marking on many glasses.

Working principle and application industry of UV laser marking machineUV Laser Marking Machine (UV Laser Marking Machine) uses a 355nm UV laser to strike a laser beam on the surface of a variety of different substances. The molecular chain of the substance is directly interrupted by a short-waveleng