 |
| Quantity: | |
|---|---|
001
DP
CO2 laser cutting machines are suitable for special parts that require uniform cutting, stainless steel with a thickness of no more than three millimeters and non-metallic materials with a thickness of no more than twenty millimeters used in service industries such as advertising and decoration. Another type of machine is to cut complex but small workpieces to save costs and cycles in mold manufacturing.
application area
CO2 laser cutting machine is suitable for non-metallic materials such as leather, fabric, epoxy resin, wood products, paper, acrylic, wool, plastic, rubber, bamboo products, etc.
Working width (mm): 600 × 900/1000 × 800/1200 × 600/1300 × 900/1600 × one thousand
Boundary dimension (mm): 1530 × one thousand and seventy × 1070/1825 × one thousand five hundred and eighty × 1200/1910 × one thousand three hundred and eighty × 1100/1910 × one thousand seven hundred and ten × 1370/2240 × one thousand seven hundred and eighty × one thousand two hundred and ninety
Total weight (kg): 260/430/430/525/605
Laser power (W): 60-130W
Cooling method: water cooling
Working speed (m/min): 0-150
Working environment: Temperature: 5-40 ℃ Humidity: 5-80% No condensation, no dust or less dust
Commonly seen in the field of non-metallic laser marking are solid laser marking machines and gas laser marking machines (CO2 laser cutting machines). non-metallic laser cutting machines generally rely on a laser power supply to drive the laser tube to emit light. Through the refraction of several mirrors, the light is transmitted to the laser head, and then the focusing mirror installed on the laser head converges the light into a point, which can reach a very high temperature and instantly sublimate the material into gas, Sucked away by an exhaust fan, thus achieving the purpose of cutting; The main gas filled in the laser tube used by general laser cutting machines is CO2, so this type of laser tube is called a CO2 laser tube, and the laser cutting machine using this type of laser tube is called a CO2 laser cutting machine.
WORKING AREA- 600*900
TUBE POWER - T-2
RF- 100 WATT - HY
MOTOR AND DRIVE- UVW THREE PHASE (LEADSHINE/ YAKO)
BLOWER - 750 W
COMPRESSOR- 380W HEALIA (TWO HEAD MACHINE NEED 2 PCS )
MIRROR- 30*3 SILVER COATED
LENS - 50.8 FL (BEST QUALITY USA COATED)
AIR PIPE LINE - 8 MM IN EACH MACHINE
WATER SENSOR- YES
PULLY - BRASS MATERIAL
BELT- 18 MM
CONTROLLER - RDC
BLOWER PIPE - GOOD QUALITY FABRIC MATERIAL
BED / WORKINT TABLE- HONEY COMB (SEPRATE FRAME )+KNIFE BLADE (EACH GAP 10 MM) SEPRATE FRAME
SENSOR- OMRON JAPAN
POWER SUPPLY - OMRON / MEANWELL
CHILLER- S&A (AS PER HEAD) 5200 SINGLE / DUAL HEAD
CUPPLER - 4 PCS IN EACH MACHINE
CO2 laser cutting machines are suitable for special parts that require uniform cutting, stainless steel with a thickness of no more than three millimeters and non-metallic materials with a thickness of no more than twenty millimeters used in service industries such as advertising and decoration. Another type of machine is to cut complex but small workpieces to save costs and cycles in mold manufacturing.
application area
CO2 laser cutting machine is suitable for non-metallic materials such as leather, fabric, epoxy resin, wood products, paper, acrylic, wool, plastic, rubber, bamboo products, etc.
Working width (mm): 600 × 900/1000 × 800/1200 × 600/1300 × 900/1600 × one thousand
Boundary dimension (mm): 1530 × one thousand and seventy × 1070/1825 × one thousand five hundred and eighty × 1200/1910 × one thousand three hundred and eighty × 1100/1910 × one thousand seven hundred and ten × 1370/2240 × one thousand seven hundred and eighty × one thousand two hundred and ninety
Total weight (kg): 260/430/430/525/605
Laser power (W): 60-130W
Cooling method: water cooling
Working speed (m/min): 0-150
Working environment: Temperature: 5-40 ℃ Humidity: 5-80% No condensation, no dust or less dust
Commonly seen in the field of non-metallic laser marking are solid laser marking machines and gas laser marking machines (CO2 laser cutting machines). non-metallic laser cutting machines generally rely on a laser power supply to drive the laser tube to emit light. Through the refraction of several mirrors, the light is transmitted to the laser head, and then the focusing mirror installed on the laser head converges the light into a point, which can reach a very high temperature and instantly sublimate the material into gas, Sucked away by an exhaust fan, thus achieving the purpose of cutting; The main gas filled in the laser tube used by general laser cutting machines is CO2, so this type of laser tube is called a CO2 laser tube, and the laser cutting machine using this type of laser tube is called a CO2 laser cutting machine.
WORKING AREA- 600*900
TUBE POWER - T-2
RF- 100 WATT - HY
MOTOR AND DRIVE- UVW THREE PHASE (LEADSHINE/ YAKO)
BLOWER - 750 W
COMPRESSOR- 380W HEALIA (TWO HEAD MACHINE NEED 2 PCS )
MIRROR- 30*3 SILVER COATED
LENS - 50.8 FL (BEST QUALITY USA COATED)
AIR PIPE LINE - 8 MM IN EACH MACHINE
WATER SENSOR- YES
PULLY - BRASS MATERIAL
BELT- 18 MM
CONTROLLER - RDC
BLOWER PIPE - GOOD QUALITY FABRIC MATERIAL
BED / WORKINT TABLE- HONEY COMB (SEPRATE FRAME )+KNIFE BLADE (EACH GAP 10 MM) SEPRATE FRAME
SENSOR- OMRON JAPAN
POWER SUPPLY - OMRON / MEANWELL
CHILLER- S&A (AS PER HEAD) 5200 SINGLE / DUAL HEAD
CUPPLER - 4 PCS IN EACH MACHINE
