 |
| Quantity: | |
|---|---|
968
DAPENG
968
CNC Supplier IPG 4KW Metal Fiber Laser Cutting Machine
HOW LASER CUTTING WORKS
Laser cutting is a technology that uses a laser to cut materials, and is typically used for industrial manufacturing applications, but is also starting to be used by schools, small businesses, and hobbyists. Laser cutting works by directing the output of a high-power laser most commonly through optics. The laser optics and CNC (computer numerical control) are used to direct the material or the laser beam generated. A typical commercial laser for cutting materials would involve a motion control system to follow a CNC of the pattern to be cut onto the material. The focused laser beam is directed at the material, which then either melts, burns, vaporizes away, or is blown away by a jet of gas, leaving an edge with a high-quality surface finish. Industrial laser cutters are used to cut flat-sheet material as well as structural and piping materials.
DP FIBER LASER CUTTING ADVANTAGES:
1, Cost saving on power consumption/ only 20-30% of co2 laser cutting machine under same power.
2, Flexibility and precision cutting of simple or complex parts
3, Adopts imported world brand fiber laser/Life time over 100,000hrs
4, Imported servo motor and gearing system ensure precision cutting
5, High quality cut with no extra finishing required
6, Higher cutting speed and efficient, speed of cutting plate over 10 meters per minute
7, Non contact cut which means no marks or contamination of the material
8, Ability to cut virtually any sheet metal
Cutting ability & Gas consume
| 2000W Cutting Parameters | |||||
| Material | Thickness (mm) | Speed (M/min) | Gas Pressure (MPa) | Gas | Cutting Height |
| Stainless Steel | 2 | 12 | 1 | N2 | 0.6 |
| 4 | 3 | >1.1 | N2 | 0.6 | |
| 5 | 1.5 | >1.8 | N2 | 0.6 | |
| 6 | 1 | >2.0 | N3 | 0.6 | |
| Carbon Steel | 2 | 6 | 1 | O2 | 1 |
| 4 | 3 | 0.6~0.8 | O2 | 1 | |
| 8 | 1.5 | 0.25~0.4 | O2 | 1 | |
| 10 | 1.2 | 0.15~0.2 | O2 | 1 | |
| 16 | 0.8 | 0.15~0.2 | O2 | 1 | |
| 20 | 0.6 | 0.1~0.2 | O2 | 1 | |
Technical parameter:
| Model | DP-L Fiber laser cutting machine |
| Laser Power | 500W/7500W laser power as Raycus, Maxphotonics such brand. But 500--1000W's first option is IPG. |
| Working Area | 1300*2500mm (1500*3000mm optional) |
| Laser Wave Length | 1064nm |
| Working Table | Sawtooth |
| Maximum Idle Running Speed | 3000mm/s |
| Position Accuracy | ±0.001mm/m |
| Position Speed | 20m/min |
| Minimum Line Width | ± 0.02mm |
| Cutting Thickness | ≤6mm |
| Control System | Cypcut |
| Position Type | red dot |
| Power Consumption | ≤12KW |
| Working Voltage | 380V/50Hz |
| Auxiliary Gas | oxygen,nitrogen,air |
| Working life of fiber module | More than 100000 hours |
| Fiber laser cutting head | Germany Precitec |
| Focus lens | Lasermech made in USA |
| Driver system | Imported servo motor |
| Liner guider system | PMI made in Taiwan , (Option THK made in Japan) |
| Transmit system | Dual Rack & Pinion type |
| Rack system | Herion made in Germany |
| Chain system | Igus made in Germany |
| Warranty time | Whole machine for 1 years (domestic fiber module 1 years, imported IPG 1 years ) |
| Delivery time | 30 days |
| Gross weight | 4000kg |
Pre-sale service:
1. Free sample making:
For free sample making/testing, please send your samples or products CAD Graphics to our company in China. Sample shipping back cost should be paid by purchaser.
2. Progressing Solution Design:
According to customer's product processing requirement, we can design the unique solution that supports higher manufacturing efficiency and better processing quality for customer.
After-sale service:
1.
One years warranty for machine, One years for domestic source (One year for IPG source)
2. Technical support
Lifelong technical support online or by email and 18 hours online service to help you use our machine well.
3. Oversea service
Offer oversea service for training,installing, operating if necessary (Buyer need offer food & accommodation, round tickets and engineer charges USD200/day)
4. Training service
Offer training at our factory for free (you could visit us and learn)
Note:
We will supply the machine with training video and user's manual in English for installing, operation, maintenance to ensure customer could use our machine well.
Our core advantages:
1. Usually have 50 units of laser marking machine(Fiber, CO2, UV, Mopa) in stock, lead time 3-5 days.
2. Sold 4500 units of laser machines in China market in 2017, with reasonable price.
3. Fiber Laser cutting machine, (700W, 1000W, 1500W+ laser cutter), usually sell 30 units/month in China.
CNC Supplier IPG 4KW Metal Fiber Laser Cutting Machine
HOW LASER CUTTING WORKS
Laser cutting is a technology that uses a laser to cut materials, and is typically used for industrial manufacturing applications, but is also starting to be used by schools, small businesses, and hobbyists. Laser cutting works by directing the output of a high-power laser most commonly through optics. The laser optics and CNC (computer numerical control) are used to direct the material or the laser beam generated. A typical commercial laser for cutting materials would involve a motion control system to follow a CNC of the pattern to be cut onto the material. The focused laser beam is directed at the material, which then either melts, burns, vaporizes away, or is blown away by a jet of gas, leaving an edge with a high-quality surface finish. Industrial laser cutters are used to cut flat-sheet material as well as structural and piping materials.
DP FIBER LASER CUTTING ADVANTAGES:
1, Cost saving on power consumption/ only 20-30% of co2 laser cutting machine under same power.
2, Flexibility and precision cutting of simple or complex parts
3, Adopts imported world brand fiber laser/Life time over 100,000hrs
4, Imported servo motor and gearing system ensure precision cutting
5, High quality cut with no extra finishing required
6, Higher cutting speed and efficient, speed of cutting plate over 10 meters per minute
7, Non contact cut which means no marks or contamination of the material
8, Ability to cut virtually any sheet metal
Cutting ability & Gas consume
| 2000W Cutting Parameters | |||||
| Material | Thickness (mm) | Speed (M/min) | Gas Pressure (MPa) | Gas | Cutting Height |
| Stainless Steel | 2 | 12 | 1 | N2 | 0.6 |
| 4 | 3 | >1.1 | N2 | 0.6 | |
| 5 | 1.5 | >1.8 | N2 | 0.6 | |
| 6 | 1 | >2.0 | N3 | 0.6 | |
| Carbon Steel | 2 | 6 | 1 | O2 | 1 |
| 4 | 3 | 0.6~0.8 | O2 | 1 | |
| 8 | 1.5 | 0.25~0.4 | O2 | 1 | |
| 10 | 1.2 | 0.15~0.2 | O2 | 1 | |
| 16 | 0.8 | 0.15~0.2 | O2 | 1 | |
| 20 | 0.6 | 0.1~0.2 | O2 | 1 | |
Technical parameter:
| Model | DP-L Fiber laser cutting machine |
| Laser Power | 500W/7500W laser power as Raycus, Maxphotonics such brand. But 500--1000W's first option is IPG. |
| Working Area | 1300*2500mm (1500*3000mm optional) |
| Laser Wave Length | 1064nm |
| Working Table | Sawtooth |
| Maximum Idle Running Speed | 3000mm/s |
| Position Accuracy | ±0.001mm/m |
| Position Speed | 20m/min |
| Minimum Line Width | ± 0.02mm |
| Cutting Thickness | ≤6mm |
| Control System | Cypcut |
| Position Type | red dot |
| Power Consumption | ≤12KW |
| Working Voltage | 380V/50Hz |
| Auxiliary Gas | oxygen,nitrogen,air |
| Working life of fiber module | More than 100000 hours |
| Fiber laser cutting head | Germany Precitec |
| Focus lens | Lasermech made in USA |
| Driver system | Imported servo motor |
| Liner guider system | PMI made in Taiwan , (Option THK made in Japan) |
| Transmit system | Dual Rack & Pinion type |
| Rack system | Herion made in Germany |
| Chain system | Igus made in Germany |
| Warranty time | Whole machine for 1 years (domestic fiber module 1 years, imported IPG 1 years ) |
| Delivery time | 30 days |
| Gross weight | 4000kg |
Pre-sale service:
1. Free sample making:
For free sample making/testing, please send your samples or products CAD Graphics to our company in China. Sample shipping back cost should be paid by purchaser.
2. Progressing Solution Design:
According to customer's product processing requirement, we can design the unique solution that supports higher manufacturing efficiency and better processing quality for customer.
After-sale service:
1.
One years warranty for machine, One years for domestic source (One year for IPG source)
2. Technical support
Lifelong technical support online or by email and 18 hours online service to help you use our machine well.
3. Oversea service
Offer oversea service for training,installing, operating if necessary (Buyer need offer food & accommodation, round tickets and engineer charges USD200/day)
4. Training service
Offer training at our factory for free (you could visit us and learn)
Note:
We will supply the machine with training video and user's manual in English for installing, operation, maintenance to ensure customer could use our machine well.
Our core advantages:
1. Usually have 50 units of laser marking machine(Fiber, CO2, UV, Mopa) in stock, lead time 3-5 days.
2. Sold 4500 units of laser machines in China market in 2017, with reasonable price.
3. Fiber Laser cutting machine, (700W, 1000W, 1500W+ laser cutter), usually sell 30 units/month in China.
