DP GROUP, founded in 2016, offer professional laser solutions and sheet metal fabrication machinery. Headquartered in Hong Kong, we operate three factories in mainland China:
DPMach (Dongguan): Specializes in laser cutting, welding, and marking.
DGDY (Dongguan): Focuses on press brake machines with advanced Panel Bender technology.
DPQG (Foshan): Manufactures large tube laser cutting machines for pipes up to 800mm in diameter and 30 meters lenth.
DP GROUP, founded in 2016, offer professional laser solutions and sheet metal fabrication machinery. Headquartered in Hong Kong, we operate three factories in mainland China:
DPMach (Dongguan): Specializes in laser cutting, welding, and marking.
DGDY (Dongguan): Focuses on press brake machines with advanced Panel Bender technology.
DPQG (Foshan): Manufactures large tube laser cutting machines for pipes up to 800mm in diameter and 30 meters lenth.
Availability: | |
---|---|
Quantity: | |
DPLC3015-1000I
DAPENG
DPLC3015-1000I
Laser cutting is a technology that uses a laser to cut materials, and is typically used for industrial manufacturing applications, but is also starting to be used by schools, small businesses, and hobbyists. Laser cutting works by directing the output of a high-power laser most commonly through optics. The laser optics and CNC (computer numerical control) are used to direct the material or the laser beam generated. A typical commercial laser for cutting materials would involve a motion control system to follow a CNC of the pattern to be cut onto the material. The focused laser beam is directed at the material, which then either melts, burns, vaporizes away, or is blown away by a jet of gas, leaving an edge with a high-quality surface finish. Industrial laser cutters are used to cut flat-sheet material as well as structural and piping materials.
1, Cost saving on power consumption/ only 20-30% of co2 laser cutting machine under same power.
2, Flexibility and precision cutting of simple or complex parts
3, Adopts imported world brand fiber laser/Life time over 100,000hrs
4, Imported servo motor and gearing system ensure precision cutting
5, High quality cut with no extra finishing required
6, Higher cutting speed and efficient, speed of cutting plate over 10 meters per minute
7, Non contact cut which means no marks or contamination of the material
8, Ability to cut virtually any sheet metal
Model | DPLC3015-500I | DPLC3015-1000I |
Medium of laser | Semiconductor pump continuous ytterbium doped fiber | |
Laser wavelength | 1070nm | |
Laser output power | 500W | 1000W |
Cutting area(mm)(L×W) | 3000mm×1500mm | |
Max cutting speed(m/min) | 18 m/min | 24 m/min |
Min line width | < 0.1mm | < 0.125mm |
Cutting depth | 0.2mm---5mm | 0.2mm---8mm |
Driving Way | Imported servo motor | |
Tranmission Way | Y-axis imported gear rack double driver,X-axis imported gear rack | |
Operational Temp Range | 10 ~ 40ºC | |
Electrical Requirements | 380V/50Hz.60Amp | |
Cooling Mode | Water cooled | |
Continuous working time | 24 hours | |
Warranty: | 2 years on laser source | |
Weight | About 3000kg | |
Outline size(mm) | 4270mm×2420mm×1750mm (L×W×H) |
Applicable Materials:
Stainless steel, carbon steel, alloy steel, silicon steel, spring steel, aluminum, aluminum alloy, galvanized sheet and other metal pipes and tubes.
Applicable Industry:
It is widely applied in industrial pipeline processing, explosion-proof equipment, military industry, chemical industry, oil exploration, lamps and lanterns, metal processing, ironware, building, etc.
FIBER LASER CUTTING SAMPLES:
FIBER LASER CUTTING Speed:
Laser cutting is a technology that uses a laser to cut materials, and is typically used for industrial manufacturing applications, but is also starting to be used by schools, small businesses, and hobbyists. Laser cutting works by directing the output of a high-power laser most commonly through optics. The laser optics and CNC (computer numerical control) are used to direct the material or the laser beam generated. A typical commercial laser for cutting materials would involve a motion control system to follow a CNC of the pattern to be cut onto the material. The focused laser beam is directed at the material, which then either melts, burns, vaporizes away, or is blown away by a jet of gas, leaving an edge with a high-quality surface finish. Industrial laser cutters are used to cut flat-sheet material as well as structural and piping materials.
1, Cost saving on power consumption/ only 20-30% of co2 laser cutting machine under same power.
2, Flexibility and precision cutting of simple or complex parts
3, Adopts imported world brand fiber laser/Life time over 100,000hrs
4, Imported servo motor and gearing system ensure precision cutting
5, High quality cut with no extra finishing required
6, Higher cutting speed and efficient, speed of cutting plate over 10 meters per minute
7, Non contact cut which means no marks or contamination of the material
8, Ability to cut virtually any sheet metal
Model | DPLC3015-500I | DPLC3015-1000I |
Medium of laser | Semiconductor pump continuous ytterbium doped fiber | |
Laser wavelength | 1070nm | |
Laser output power | 500W | 1000W |
Cutting area(mm)(L×W) | 3000mm×1500mm | |
Max cutting speed(m/min) | 18 m/min | 24 m/min |
Min line width | < 0.1mm | < 0.125mm |
Cutting depth | 0.2mm---5mm | 0.2mm---8mm |
Driving Way | Imported servo motor | |
Tranmission Way | Y-axis imported gear rack double driver,X-axis imported gear rack | |
Operational Temp Range | 10 ~ 40ºC | |
Electrical Requirements | 380V/50Hz.60Amp | |
Cooling Mode | Water cooled | |
Continuous working time | 24 hours | |
Warranty: | 2 years on laser source | |
Weight | About 3000kg | |
Outline size(mm) | 4270mm×2420mm×1750mm (L×W×H) |
Applicable Materials:
Stainless steel, carbon steel, alloy steel, silicon steel, spring steel, aluminum, aluminum alloy, galvanized sheet and other metal pipes and tubes.
Applicable Industry:
It is widely applied in industrial pipeline processing, explosion-proof equipment, military industry, chemical industry, oil exploration, lamps and lanterns, metal processing, ironware, building, etc.
FIBER LASER CUTTING SAMPLES:
FIBER LASER CUTTING Speed:
content is empty!