FSCUT1000S medium power laser cutting control system

Share to:

FSCUT1000S medium power laser cutting control system

Name: FSCUT1000S medium power laser cutting control system
Brand: FRIENDESS
Rating: 5.0 (28 reviews)

Founded in Zizhu National high-tech Industrial Development Park on September 11, 2007, Shanghai Friendess Electronics Technology Co., Ltd. supported by Shanghai Technology Entrepreneurship Foundation for Graduates and CPC Minhang Committee of Science & Technology at the beginning, is a high-tech private enterprise which locates at the Cangyuan Technology Park of Minhang District near SJTU and ECNU.

Availability:

Quantity:



Inquire Add to Basket

Model:
FSCUT1000S
Brand:
FRIENDESS
Code:
FSCUT1000S

Product Description

FSCUT1000S medium power laser cutting control system

FSCUT1000S

The FSCUT1000S system is a low-cost fiber laser cutting solution tailored on the FSCUT2000C medium power laser cutting system. The system combines a motion control card and a capacitor height controller into one, and is a special laser cutting system with extremely high cost performance.

Specification

Adaptation software

CypOne laser cutting software

control card

BMC1603

Interface Type

32-bit PCI bus, 132MB/s

Terminal board

BCL4562

Power requirements

24V DC/2A

Motor control signal

X/Y1/Y2 axis pulse output, the highest frequency is 3MHz

Z axis analog output, -10~+10V

X, Y1, Z axis with encoder input interface, the highest sampling frequency is 10MHz

Dedicated output

2-way DA: 0~10V, 50mA

1 PWM: 5V/24V optional, precision 5KHz (0.1%)

Dedicated input

6-way limit: X/Y1/Z 3-axis positive and negative limit

Universal input

6 channels: low-level effective, support normally open, normally closed

Universal output port

8 channels: relay output, 30V DC/5A

working environment

Temperature: 0~55℃

Humidity 5%~95% (no condensation)

Performance characteristics

Craft

Supports up to two levels of perforation

Only support the communication of domestic lasers such as Ruike, Chuangxin, Fibo, etc.

Support flight cutting, leapfrog

Capacitor edge finding is not supported; the use of the expansion board can support electric focus, double exchange workbench; support simple layout

Does not support advanced processes such as cooling points, sharp corner ring cutting, and release corners

control

Track accuracy 0.05mm, positioning accuracy 0.01mm

Maximum cutting speed 100m/min, maximum moving speed 100m/min

Maximum acceleration 1G

Does not support dual-drive error alarm and pitch compensation functions

The origin signal is not supported, only the limit signal is sampled when returning to the origin

Application industry

It is suitable for low-power fiber laser cutting machines within 1500W, and is widely used in the laser processing equipment required for thin metals such as the advertising industry.