 |
| Quantity: | |
|---|---|
3C laser welding
DAPENG
| Laser Type | Fiber |
| Wavelength | 1070nm |
| Laser Mode | Continuous/YAG |
| Continuous Average | 75w |
| Max.Pulse Power | 750w |
| Pulse Average Power | 75w |
| Max.Pulse Energy | 7.5J |
| Beam Quality | 5mm*mrad |
| Pulse Repetition Frequency | 0Hz ≤ F ≤ 2500Hz |
| Min. Focus Spot Diameter | 0.1-0.4mm |
| Cooling Mode | Air Cooling |
| Voltage | AC220V±10% 50V 60HZ |
| Fiber Diameter | 50um/100um/200um (Optional) |
| Fiber length | 10m |
| Energy Stability | <±1 |
| Operating Temperature | -10℃—40℃ |
The Model Characteristic
1. The diameter of the focused spot is small, suitable for precise welding of tiny workpieces;
2. YAG and continuous mode can be switched, and processing tasks of two different lasers can be processed simultaneously;
3. High electro-optical conversion efficiency, no consumables, maintenance-free, low production costs;
4. Air-cooled compact design, covering an area of less than 1 square meter, easy to automate.
Samples Show
It is mainly used for welding of 3C precision devices, medical endoscopes, precision motors of mobile phones, battery pole pieces, etc., and can be used for fine cutting of metal and non-metal. The application involves optical communications, IT, electronics, batteries, instruments, hardware and other fields.
Mobile phone connector laser welding
Battery Laser Welding
| Laser Type | Fiber |
| Wavelength | 1070nm |
| Laser Mode | Continuous/YAG |
| Continuous Average | 75w |
| Max.Pulse Power | 750w |
| Pulse Average Power | 75w |
| Max.Pulse Energy | 7.5J |
| Beam Quality | 5mm*mrad |
| Pulse Repetition Frequency | 0Hz ≤ F ≤ 2500Hz |
| Min. Focus Spot Diameter | 0.1-0.4mm |
| Cooling Mode | Air Cooling |
| Voltage | AC220V±10% 50V 60HZ |
| Fiber Diameter | 50um/100um/200um (Optional) |
| Fiber length | 10m |
| Energy Stability | <±1 |
| Operating Temperature | -10℃—40℃ |
The Model Characteristic
1. The diameter of the focused spot is small, suitable for precise welding of tiny workpieces;
2. YAG and continuous mode can be switched, and processing tasks of two different lasers can be processed simultaneously;
3. High electro-optical conversion efficiency, no consumables, maintenance-free, low production costs;
4. Air-cooled compact design, covering an area of less than 1 square meter, easy to automate.
Samples Show
It is mainly used for welding of 3C precision devices, medical endoscopes, precision motors of mobile phones, battery pole pieces, etc., and can be used for fine cutting of metal and non-metal. The application involves optical communications, IT, electronics, batteries, instruments, hardware and other fields.
Mobile phone connector laser welding
Battery Laser Welding
