 |
| Quantity: | |
|---|---|
BT220
RayTools
BT220
RayTools BT220 500W fine cutting head
The minimum width of the incision can reach 8um
Suitable for precision machining of small parts
The BT220 series is a Swiss company RayTools AG. The fine laser processing head introduced in 2014 is suitable for precision processing of small parts. The laser head is specially designed and adopts a precise lens group composed of multiple lenses to eliminate spherical aberration. With high beam quality fiber laser, the minimum width of the incision can reach 8um without angle. It can be widely used in ceramic processing, medical processing and semiconductor processing industries.
product features
• Focusing uses a lens group composed of three precision lenses;
• Knob type focus adjustment, can finely adjust the focus;
• The minimum scale is 0.05mm, and the adjustable range is 10mm;
• Drawer type lens holder is adopted, which makes the replacement of protective lens fast and simple;
• Optional with induction nozzle connector and height sensor;
• Suitable for small aperture nozzles, the minimum nozzle aperture is 0.3mm;
• Possess a variety of optical fiber interfaces, which can be adapted to various lasers.
technical parameter
Cutting head
Power rating: ≤500W
Clear aperture: 25mm
Protective lens specifications: φ22.4mm*4.1mm; φ27.9mm*4.1mm
Auxiliary gas pressure: ≤20bar
Weight: ~ 1.5kg
Collimator
Clear aperture: 25mm
Height sensor (EtherCA or ±10V optional)
Travel range (accurate to 1mm): 0.3-10mm
Calibration: automatic calibration/manual calibration
Response time: <1ms
Temperature stability: in the range of 0 to 45 degrees, the temperature stability is in the range of ±5%
Power requirement: 24V
Output (linear signal or optimized curve): 0~10V analog quantity/+-10V analog quantity
EDS-88C0 (ECAT brand) is selected for EtherCAT, please refer to the ECAT manual
RayTools BT220 500W fine cutting head
The minimum width of the incision can reach 8um
Suitable for precision machining of small parts
The BT220 series is a Swiss company RayTools AG. The fine laser processing head introduced in 2014 is suitable for precision processing of small parts. The laser head is specially designed and adopts a precise lens group composed of multiple lenses to eliminate spherical aberration. With high beam quality fiber laser, the minimum width of the incision can reach 8um without angle. It can be widely used in ceramic processing, medical processing and semiconductor processing industries.
product features
• Focusing uses a lens group composed of three precision lenses;
• Knob type focus adjustment, can finely adjust the focus;
• The minimum scale is 0.05mm, and the adjustable range is 10mm;
• Drawer type lens holder is adopted, which makes the replacement of protective lens fast and simple;
• Optional with induction nozzle connector and height sensor;
• Suitable for small aperture nozzles, the minimum nozzle aperture is 0.3mm;
• Possess a variety of optical fiber interfaces, which can be adapted to various lasers.
technical parameter
Cutting head
Power rating: ≤500W
Clear aperture: 25mm
Protective lens specifications: φ22.4mm*4.1mm; φ27.9mm*4.1mm
Auxiliary gas pressure: ≤20bar
Weight: ~ 1.5kg
Collimator
Clear aperture: 25mm
Height sensor (EtherCA or ±10V optional)
Travel range (accurate to 1mm): 0.3-10mm
Calibration: automatic calibration/manual calibration
Response time: <1ms
Temperature stability: in the range of 0 to 45 degrees, the temperature stability is in the range of ±5%
Power requirement: 24V
Output (linear signal or optimized curve): 0~10V analog quantity/+-10V analog quantity
EDS-88C0 (ECAT brand) is selected for EtherCAT, please refer to the ECAT manual
